BOWLS

FULLY INTEGRATED STAINLESS STEEL SINK BOWLS

GEC Anderson® stainless steel sink bowls are seamlessly integrated within GEC Anderson® stainless steel worktops – exactly where specified. Their clean and sleek appearance is easy to maintain and is combined with unrivalled practicality, hygiene and safety.

GEC Anderson® stainless steel sinks can be specified as single, double or any other combinations and are available separately (e.g. to inset or undermount within other worktops).

• Minimum distance from worktop edge to bowl: 35 mm (70 mm when mounted on stainless steel legs)

• Minimum distance between two or more single bowls: 35 mm

• Minimum space required for tapholes: 80 mm

• Bowl sizes refer to internal measurements (excluding flange)

• Non-standard sizes available to order

• Outlet positions vary

• 89 mm hole with basket strainer waste (BSW) is standard. Option: Ø 38 mm plug-waste and overflow

• Tapholes are provided as required.

Product Enquiry

SERIES A

GEC Anderson® Series A sinks have a sleek and modern appearance and are made from the highest quality brushed satin stainless steel.

All bowls feature the 15 mm corner radius and measure 400 mm from front to back.

They can be specified within GEC Anderson® stainless steel worktops in any position or combination.

Individual bowls are also available with 20 mm flat flange (eg. for use in conjunction with other worksurface materials) that are suitable for inset, under-mount or flush-mount applications.

CIRCULAR

Choose from our wide range of low maintenance standard bowl sizes to achieve the exact combination or configuration you require.

To order simply specify the size and postion of each bowl within the stainless steel worksurface and indicate the locations of any taphole or other cut-out requirements.

Bowls to INSET or UNDERMOUNT (eg: within alternative worktops) are available individually.

STANDARD

Choose from our wide range of low maintenance standard bowl sizes to achieve the exact conbination or configuration you require.

To order simply specify the size and postion of each bowl within the stainless steel worksurface and indicate the location of any taphole or other cut-out requirements.

Special bowl sizes are available to order.

Bowls to INSET or UNDERMOUNT (eg. within alternative worktops) are available individually.

COMBINATIONS

Choose from our wide range of low maintenance standard bowl sizes to achieve the exact conbination or configuration you require.

To order simply specify the size and postion of each bowl within the stainless steel worksurface and indicate the locations of any taphole or other cut-out requirements.

Special bowl sizes are available to order.

Bowls to INSET or UNDERMOUNT (eg. within alternative worktops) are available individually.

WET ZONES

Lipped edges (edge 3 or edge 5) are generally recommended for worktops used in wet areas.

Alternatively, or in addition, the following options are available:

Shallow Recess – Any size, with optional fall. Minimum depth: 10 mm. Corner radius: 10 or 15 mm.
Pressed Recess – Any size, flat. Depth: 3 mm. Variable corner radius (minimum 2 mm).
Tailored Edges – Using variations on GEC Anderson edge 3 and edge 2.
Drainers – Standard sink and drainer combinations
BOSS – Raised dimple patter to facilitate draining and drying