Company details for Axair Fans

Products

• EC FanGrid  
  
  An ECFanGrid is a multiple fan array designed to improve reliabi...
• Axial Fans  
  
  External rotor motor Design Fixed blades impeller, designed ...
• High Pressure Centrifugal Fans  
  
  High pressure fans have robust scroll housings and impellers i...
• Backward Curved Centrifugal Fans  
  
  Design External rotor motors are usually contained within the d...
• Forward Curved Centrifugal Fans  
  
  Fan : Impeller with forward-facing blades made from galvanised ...
• Chemical Plastic Fans  
  
  Axair Fans supply a wide range of polypropylene corrosion resist...
• Plastic Centrifugal Fans - Corrosion Resistant  
  
  All-polypropylene moulded construction fans, designed to extract...
• Fan Coil Fans  
  
  Forward Curved Centrifugal GDS Range: The Axair range of GDS ce...
• ATEX Certified Fans  
  
  Design Since the ATEX Directive became enforceable in law, grea...
• In-Line Duct Fans  
  
  This range of in-line duct fans is powered by up-to-date high ef...
• Special Fan Products  
  
  For duties that would be beyond the capacity of industry standar...
• Smoke Fans  
  
  Smoke Fans All Axair smoke fans are manufactured by Casals Vent...
• Roof Mounted Centrifugal Fans  
  
  Our centrifugal roof fans are available in either vertical or ho...
• External Rotor Motors  
  
  Crossflow or Tangential fans are designed to provide a 'curt...
• 'FPF' Series - Fan Filter Units  
  
  Fan filter assemblies are purpose designed to provide clean co...
• FF Series - Fan Filter Units  
  
  Fan filter assemblies are purpose designed to provide clean cool...
• Roof Mounted Extract Units  
  
  In some situations it is better to extract warm air from the top...
• ATEX Axial Fans  
  
  ATEX Axial Fans Axair supplies ATEX Category 2 Zone 1 wall moun...
• Enclosure Accessories  
  
  Bi-metallic thermostats are used to control the temperature with...
• Clean Air Solutions  
  
  Axair now provide clean air solutions that utilise hydroxyl tech...
• ATEX Polypropylene Fans  
  
  The specification and purchase of ATEX fans is difficult enough ...
• ATEX Centrifugal Fans  
  
  Suitable for a wide range of potentially explosive environments,...
• ATEX Explosion Proof Fans  
  
  Our wide range of ATEX explosion proof fans are suitable for zon...
• ATEX Roof Fans  
  
  ATEX roof fans are extraction fans to be installed on roofs of  ...
• High Temperature Fans  
  
  High temperature fans or hot gas fans are available within our i...

About us

High Pressure Centrifugal Fans

ATEX Forward Curved Centrifugal Fans

Cased Axial Fans

Short Cased Axial Fans

ATEX Compact Axial Fans

BD Inch Blowers

GKHM Modular Backward Curved Centrifugal Fans

EWheel Backward Curved Centrifugal Fans

Corrosion Resistant Fans

Polypropylene ATEX Fans

Forward Curved Centrifugal Fans

Previous Next

View website

Articles/Press Releases

• 11/01/2024 - Advanced Digital Tools to Enhance Precision in Fan Specification for Fume Extraction Systems
  Accurate fume fan selection plays a pivotal role in the overall effectiveness of fume extraction systems. Precision and efficiency are of paramount importance to ensure the safety and well-being of occupants in industrial and laboratory settings.
• 15/11/2023 - BREEAM Indoor Air Quality with EC Plug Fans for Air Handling Units
  Energy efficiency, reliability, customisation, ease of maintenance and compliance with industry regulations are key areas that air handling unit manufacturers focus on during the design and production of their finished units.
• 07/09/2023 - ATEX S50 Polypropylene Fans for Fume Extraction Systems
  Axair’s largest and most powerful polypropylene fan; the S50, is now available in ATEX suitable for zone 2 gas environments.
• 04/05/2023 - Reducing Scope 2 Carbon Emissions with AHU Fan Upgrades
  The greenhouse gas protocol establishes a set of comprehensive, standardised frameworks to measure and manage greenhouse gas (GHG) emissions from private and public sector operations.
• 27/04/2023 - Understanding Corrosion Resistant C3, C4, C5 and CX Paint Grades
  When selecting a fan for a corrosive environment it is important to have some knowledge of how corrosive atmospheres are categorised, this ensures that a selected fan is deemed suitable for use in harsh environments that are at risk of steelwork corrosion, coating failures, and a reduction in the life span of the components ability to perform to its required function.
• 27/04/2023 - Energy Saving EC Forward Curved Fans for Air Curtains
  Air curtains are devices that are designed to reduce energy consumption and increase comfort. They’re generally powered by EC forward curved centrifugal fans and work to produce a barrier of air, usually over an open doorway of a building to maintain the indoor temperature and block outdoor pollution and contaminants from entering.
• 27/03/2023 - Mechanical Ventilation with Heat Recovery (MVHR) – Basic & Quality System Differences
  Mechanical Ventilation with Heat Recovery (MVHR) is increasingly used for controlled ventilation in new and existing buildings.
• 27/03/2023 - ATEX Fans Crowned Winner of The Net Innovation Award 2023
  We are delighted to announce that our range of ATEX fans for IIC hydrogen exhaust have been selected as the winner for the Net Zero Innovation Award as part of the HazardEx Awards 2023.
• 24/03/2023 - ATEX Concepts: What is BS EN 14986:2017?
  Even though Britain has left the European Union, there are still European laws, legislative pieces and standards that have been adopted as a British standard or as formal guidelines. One example is the European standard EN 14986:2017 which has the status of a British standard through BS EN 14986:2017.
• 24/03/2023 - Zone Two ATEX Fans Designed to Equipment Category 3G
  Zone 2 ATEX fans designed to the exacting standards required for category 3G are suitable for gas environments where there is a rare or abnormal chance of an explosion occurring.
• 09/02/2023 - Corrosion Resistant Fans for Oxygen Rich Environments
  Corrosion resistant fans are a necessary component for oxygen rich environments such as the aquaculture and fish farming industry. They are required to remove high concentrations of oxygen from the facilities which is accumulated during the oxygenation process.
• 25/01/2023 - The Complete School Fume Extraction Fan Kit
  Efficient fume cupboards are fundamental systems for most schools, colleges and universities, protecting staff and students from the hazardous fumes or vapours produced by science or design & technology processes.
• 25/01/2023 - Centrifugal Blower Fans for Combustion Burning of Medical Waste
  Centrifugal blower fans inside medical waste incinerators provide the right amount of oxygen to provoke rapid combustion at full capacity.
• 25/01/2023 - Zone One ATEX Fans for Category 2 Gas Environments
  Zone one ATEX fans suitable for gas environments, are available from our wide range of industrial fans designed and constructed for use in potentially explosive atmospheres.
• 25/01/2023 - A Comprehensive Plug Fan Range
  A plug fan is a variant of a centrifugal fan that over many years, has become the industrial fan of choice for many efficiency conscious applications.
• 14/11/2022 - EC Fanwall Q&A for Engineers
  Continuous and consistent airflow is essential in most facilities, making under-performing or unreliable fans simply unacceptable. In addition to reliability concerns, inefficient fans can be a buildings biggest energy consumer. Learn more about Axair’s EC FanGrid solution below.
• 24/10/2022 - The Role of the Industrial Blower Fan in Residual Waste to Energy Incineration
  Waste to energy incineration systems are a sustainable option for reducing the amount of municipal waste ending up in landfill. The heat generated from combustion processes in these systems produce a renewable source of energy contributing to UK and global energy generation. Waste energy plants manage non-recyclable waste with this technology in aim of preventing any waste at all being disregarded in landfill.
• 24/10/2022 - Corrosion Resistant Stainless Steel Fans – Robust & Hygienic
  The materials used to manufacture an industrial fan, whether stainless steel, aluminium, mild steel or polypropylene, will hugely affect the versatility and uses of that particular fan.
• 12/09/2022 - Combustible Dust Explosions in Industrial Processes
  Many industrial processes pose the risk of dust explosions due to the handling of fine combustible dust particles accumulated in the air and on surfaces. High concentrations of dust particles that fall below the measure of 500 micron have a much higher explosibility making it critical to ensure the correct equipment and safety measures are in place.
• 01/09/2022 - Exhaust Fans for Petrochemical Production in the Oil & Gas Industry
  As an ATEX and corrosion resistant fans expert we regularly speak to contractors, installers and consultants operating in the oil and gas industry including those that are involved in the ventilation and exhaust systems to safely operate petrochemical processes.
• 13/07/2022 - NIMUS Fans Improve Efficiency and Cost Reduction at UK Biomass Gas Site
  The NIMUS range of highly efficient, medium pressure, backward curved, single inlet fans form an integral part of the Storm range produced by Axair’s supply partner, Casals Ventilation.
• 28/06/2022 - Fans for Power Electronics Cooling
  Selecting the correct fan for electronic cooling systems or data centres within the telecommunication sector.
• 23/06/2022 - Replacing a Fan in a Fume Cupboard – Choosing the Right Plastic Fan
  An efficient exhaust fan is key to providing an effective fume cupboard that protects laboratory workers and technicians from exposure to toxic chemicals. New and existing systems must meet strict regulations with the correct exposure measures in place and yearly maintenance checks should be carried out to ensure that best performance and safety levels are maintained.
• 06/06/2022 - IIC Hydrogen Exhaust & Effective Battery Room Ventilation
  Everyone knows the function of a battery; to store electricity in the form of chemical energy and to convert to electrical energy when required.
• 01/06/2022 - Combustible Dust & Textile Industrial Fans
  Dust explosions can occur in any activity in which solid materials are treated and finely divided. Small sized particles are produced during manufacturing processes.
• 24/05/2022 - Ecofit Forward Curved Centrifugal Fans with AC or EC motors
  Our range of single inlet forward curved centrifugal fans are manufactured by Ecofit and are available in both standard AC or energy efficient EC versions.
• 09/05/2022 - New Launch: I-Series Backward Curved EC Plug Fans
  High Airflow, High Efficiency, High Performance Plug Fans
• 05/05/2022 - Corrosive Fume Extraction Case Studies
  Axair have been working with corrosive air applications for over 25 years. Supporting customers with key ventilation issues in industrial and corrosive fume extraction.
• 21/04/2022 - Industrial Fans for Maximum Combustion in Waste Wood Renewable Energy Systems.
  Businesses operating with a wide range of wood materials and high waste disposal costs may want to consider utilising the waste by using renewable energy systems.
• 14/04/2022 - Transformer Cooling Fans
  High power transformers are vital components within power supply systems and work to either ‘step up’ or ‘step down’ an incoming power supply. This is done by a precise relationship between the number of turns on the primary and secondary coils.
• 28/03/2022 - Air Measurement Tools for SprayBooth & Refinishing Applications
  Spray booths require regular maintenance checks to ensure optimal efficiency and adherence to industry specific safety standards.
• 11/03/2022 - Industrial Fan Impellers & Fans for Spray Booth Ventilation
  Choosing a fan that can deliver a precise airflow and a consistent pressure in and out of the spray booth is critical when removing fumes and overspray, and ensures an adequate change in make up air in paint booths.
• 09/03/2022 - Axair Support the Development of Mobile Incineration Units
  Mobile incinerators are designed to be on a trailer, truck bed or in a container. They play a key role in the waste management industry allowing for rapid response to sudden outbreaks of disease or mass pollution and the safe and sterile incineration of potentially hazardous waste.
• 03/03/2022 - The advantages of multiple fans in parallel vs. a single fan in ventilation systems
  Increased demand for energy efficient systems in line with environmental concerns has designers selecting EC plug fans for new and existing ventilation systems.
• 03/12/2021 - Balanced Airflow in Heat Recovery Systems with Constant Volume Fans
  High-cost savings and better indoor air quality are just a few of the key advantages of energy efficient refurbishments and new building design using controlled ventilation with heat recovery.
• 11/08/2021 - High Performance Cooling for High Power Control Panels
  Over the past few years, it’s quite clear that components within an electrical control panel have got smaller, this is down to the challenges imposed by clients wanting smaller enclosures to fit within much smaller spaces.
• 19/07/2021 - A Fresh New Website & A Fresh New Team – How Axair Fans Has Changed
  Due to the ongoing focus on their digital presence, Axair Fans has invested in a fresh new web design to feature its vast range of ATEX and industrial fans.
• 13/07/2021 - The Evolution of the Plug Fan
  In the air handling market over the past few years there has been a fundamental shift from old scroll type fans to higher efficiency plug type fans.
• 07/06/2021 - Extraction Fans for Indoor Swimming Pools & Chlorine Ventilation
  We all know that chlorine is widely used to treat water for swimming pools in leisure centres and domestic pools.
• 18/05/2021 - Axair Partner with Buy Social Enterprise MSS-CKD
  Axair are extremely proud to join forces with buy social enterprise MSS-CKD.
• 15/07/2020 - How to effectively protect your office spaces?
  Is following the governments advice enough? It’s all good and well washing hands regularly and sneezing into your elbow but is there anything further we can feasibly do to protect our office spaces and workforces?
• 17/01/2020 - 5 Common Mistakes in Enclosure Cooling
  The thermal conditions in enclosures and cabinets directly impact the longevity of the electrical and electronic components they house.
• 03/01/2020 - Enclosure Cooling: Things to know about Airflow
  Looking at datasheets to obtain the correct airflow for a filter fan unit is not always plain sailing. Many manufactures are coy in how this information is displayed. Here we explain what the figures mean and how best to determine the correct airflow at the correct frequency.
• 14/11/2019 - Efficient Cooling Power Delivered to Rolling Stock Yard
  Axair Fans have recently provided a rolling stock maintenance yard with two ECFanGrids as part of a package of enhancements to improve the working environment and meet energy saving targets.
• 15/10/2019 - The Importance of Chemical Storage Ventilation
  Many industries require a number of potentially hazardous chemicals in day to day maintenance, manufacturing, cleaning, sterilization, testing and operating applications.
• 24/09/2019 - 4 Ways to Cool a Cabinet
  Ensuring a cabinet is well ventilated and cool is vital for protecting the equipment it houses.
• 09/08/2019 - New Heights in Heat-Resistance: CLIBOS High Temperature Fan
  In collaboration with supply partner Casals Ventilation, Axair has recently launched a new high temperature fan designed to handle the hottest air yet.
• 04/07/2019 - Commercial Kitchen Extractor & Supply Air Fans
  Meeting the Demands of a Commercial Kitchen
• 28/06/2019 - 4 Myths about Electrical Enclosures
  Whilst we know that the electrical components that cabinets house must be ventilated to avoid temperature and humidity problems, there are a number of misconceptions about enclosures. We bust the most common four myths below.
• 03/05/2019 - Flexibility in Commercial Ventilation
  Continuous and consistent airflow is essential to virtually every commercial facility, making under-performing or unreliable fans simply unacceptable.
• 11/04/2019 - Process Cooling in Factories
  Process cooling in industry is an important part of manufacturing.
• 25/07/2017 - Alerting Live Enclosure Voltages with The Flash Signal Device
  The maintenance and inspection of electrical enclosures should be carried out under safe and efficient working practices.
• 05/06/2017 - The Axair Group Launch The First ATEX IP68 Frame Axial Fan
  The Axair Group announce the release of the first ATEX IP68 Compact Fan to the market.
• 24/03/2017 - Quiet fans score in laboratory environment
  Two factors which are equally important to consider in professional laboratories are noise and vibration from fume cupboard fans.
• 16/03/2017 - Understanding Fan Laws
  The infinity laws for fans are used in HVAC to express the relationship between variables involved in fan performance and power.
• 17/02/2017 - Axair Donate to The Little Princess Trust
  Here at Axair Fans we have a strong belief in doing everything we possibly can.
• 07/02/2017 - Selecting Industrial Fans For Biomass Applications
  At Axair we’re familiar with supplying industrial fans for use within renewable energy generation and offer a range of fans specially designed for use in Biomass fuel applications. These fans range from low to high pressure including those for materials handling and high temperatures.
• 11/11/2016 - All About Smoke Control
  Axair Fans has been actively working within Smoke Control over the past year, working with consultants and fire engineers to deliver an effective smoke control system.
• 25/10/2016 - New Product Release: Digital Electronic Speed Controller
  A large number of motors are being used for general purposes in our surroundings from house-hold equipment to machine tools in industrial facilities.
• 06/10/2016 - Focus On Smoke, Pressurisation & Evacuation
  At Axair Fans, we’re always looking at ways to add value for our customers, whether it be improving ventilation systems, reducing costs or offering educational seminars to improve knowledge of particular subjects.
• 09/09/2016 - Axair Fans Increase Company Portfolio
  Axair Fans announce the addition of Axair Refrigeration To The Axair Group
• 24/08/2016 - Getting To Know Axair Fans
  From its humble beginnings within a spare bedroom in 1983, Grant Edwards, Managing Director of Axair Fans, now oversees a successful distribution business working in partnership with an impressive host of industrial fan manufacturers.
• 22/07/2016 - Warehouse Ventilation | Centrifugal Roof Fans
  Warehouse Ventilation Is an important factor for many businesses…
• 02/06/2016 - Axair Fuel Fans For Efficient, Clean & Safe Biofuel Drying
  With renewable energy sources on our mind, we recently posted a blog update around Biomass as an alternative to fossil fuels so now we’re delighted to be able to add another renewable energy source provider to our midst, improving our expertise and improving the carbon footprint of UK businesses.
• 18/04/2016 - Axair Fans UK Limited | Entering the World Of E-Commerce
  It’s been just a few short weeks since the launch of their existing website and its mobile responsive new platform and now Axair Fans UK Limited has launched a brand new E-commerce website, www.axaironline.co.uk enabling climate control customers to quickly purchase online using their debit or credit cards.
• 12/04/2016 - Introduction to Mechanical Smoke Control
  This document is intended to provide a basic understanding of the purpose and goals of smoke control by considering relevant legislation and available smoke control systems.
• 30/03/2016 - An Inland Of Revenue For AC Fans….
  Back in 1994, when Axair was in its early start up days, began the transformation of a brownfield site for use by The Inland Revenue to create office accommodation space for 1,800 staff. The development consisted of seven separate buildings, in the form of courtyards and L-shaped blocks which overlooked Nottingham Castle
• 08/03/2016 - Axair Become Even More Responsive with A New Mobile Friendly Website..
  Adding to the company strapline “More Than Just A Fan Supplier”, Axair Fans UK Limited have officially relaunched our company website www.axair-fans.co.uk.
• 14/01/2016 - “E” is for Energy Efficient - introducing the new E-Wheel
  Having previously offered both the W and B series of backward curved impellers, Axair supplier partner Rosenberg have developed a new addition to the range; the E-Wheel.
• 09/04/2013 - New ErP compliant Rosenberg fan
  The Rosenberg EC backward curved radial fans can be supplied either with or without a mounting frame; GKHM and GKHR.
• 19/02/2013 - Rosenberg EC in-line duct fans from Axair
  Rosenberg has launched a new range of EC in-line duct fans in metal casings. Available in the following industry standard spigot sizes 160, 200, 250, 315 and 355 they have a lower consumption compared to traditional AC alternatives. Fitted with all usual EC features, such as tacho output (speed sensor), and easy speed controllability by 0-10VDC signal or PWM.
• 29/01/2013 - Inch blowers from Axair Fans
  Axair Fans offer a range of direct driven forward curved double inlet centrifugal fans.
• 03/10/2012 - Axair offers the key to flexibility
  Axair Fans offers the key to flexibility in the form of Ecofit 'GRE' range of single inlet centrifugal fans.
• 06/08/2012 - Axair present new colour for enclosure cooling
  Axair Fans add a new colour to their diverse range of fan filter units.
• 24/02/2011 - Axairs' fans resist hazardous fumes
  Axair Fans range of polypropylene fans offer longer life when handling corrosive gasses and fumes.
• 14/07/2010 - Axairs' high efficiency EC fans for installers
  Axair Fans UK Ltd, have introduced Rosenberg packaged fans with Electronically Commutated energy saving EC technology for the installers market.
• 09/02/2010 - Kitchen extract fan now easy to clean
  Axair Fans offers an ingenious centrifugal fan, fitted with an access door for maintenance.

Brochures

• Commercial Fans
• EC Fan Selection
• EC Fans - Commercial Range
• ErP Information - 1st Edition
• ETRI Special Fans & Blowers
• Inch Blowers
• Labair Laboratory Airflow Monitors & Controls
• OEM Catalogue
• Plate & Cased Axial
• Rosenberg Selection
• Standard Frame Axial Fans
• Axair Fans Range Brochure
• Axair Fans EWheel Brochure
• Industrial Medium Pressure MB Fans
• Axair Fans Thermal Management 2018
• Corrosion Resistant Fans & Accessories Full Range
• ATEX Rated Fans Metal and Plastic 2022
• SEAT Industrial Fume Extraction 2022
• ATEX Certified Fans - Hydrogen IIC
• GKHM EC Modular Plug Fans 2022
• R63 Aluminium Impellers for SprayBooths Pages
• ATEX Hydrogen Wind to Hydrogen 2022
• Axair Fans - ECFanGrid Information Pack

Social media

Trade Associations

Related categories

• Air Cooling Fans
• Airflow Monitors
• ATEX Certified Fans
• Axial Fans
• Battery Storage
• Box Enclosures
• Centrifugal Fans
• Commercial Fans
• Commercial Kitchen Ventilation
• Controllers
• Cooling Equipment
• Cooling Systems
• Corrosion Resistant Fans
• DC Motor
• Duct Heaters

• Dust & Fume Extraction
• EC (Electronically Communicated) Fans
• Electrical Enclosures
• Electronic Controllers
• Electronic Enclosures
• Enclosure Fans
• Energy Efficient Fans
• Extractor Fan
• Fans
• Fume Cupboard Fans
• Fume Cupboards
• Fume Extraction Systems
• Heating & Ventilation Systems
• Industrial fans
• Industrial ventilation

• Kitchen extraction systems
• Kitchen extractor fans
• Mixed flow fans
• Smoke extraction
• Smoke ventilation
• Thermal management products
• Ventilating
• Ventilation
• Ventilation & cooling
• Ventilation ducting
• Ventilation equipment
• Ventilation Fans
• Ventilation products
• Ventilation systems