The GD47AC transmitter is a self contained air quality monitoring transmitter. It is ideal for post occupancy studies in both domestic and institutional new-builds and refurbishment studies.
GD47AC
The GenII Logmitter is a series of devices from Eltek that can be configured as a GenII transmitter or standalone datalogger.
Configured as a logger and deployed alone, it is ideal for smaller spaces and short term or temporary events in sites such as galleries or laboratories. For large buildings, e.g. city block museums, storage areas or research laboratories, it can be deployed as a transmitter alongside other GenII transmitters.
GD47B
AQ110A is an advanced air quality transmitter that can be used alongside the existing family of GenII transmitters. It enables detailed monitoring of a site such as a school, hospital, office, gallery, or work area - anywhere that air pollution can affect the health of the occupants or the objects and processes within.
AQ112 has all of the functionality of the AQ110A, with the addition of an ozone (O3) sensor.
AQ110A
AQ211 is an advanced air quality transmitter that can be used alongside the existing family of GenII transmitters and can also operate as an independant data logger. It enables detailed monitoring of a site such as a school, hospital, office, gallery, or work area - anywhere that air pollution can affect the health of the occupants or the objects and processes within.
AQ211 has all of the functionality of the AQ110, with the addition of an LTE-m & NBIoT modem. The logger has internal memory to store over a million readings and can optionally report directly to a cloud based Darca Conenct site
AQ211
GD48 is an advanced air quality transmitter that can be used alongside the existing family of GenII transmitters. It enables detailed monitoring of a site such as a school, hospital, office, gallery, or work area - anywhere that air pollution can affect the health of the occupants or the objects and processes within.
GD48 has sensors to record humidity, air temperature and particulates at 3 common sizes.
GD48
This kit enables fitment of the transmitter's built-in wall bracket to difficult or uneven surfaces. The kit provides additional docking security.
The following products are supported:
WBG
Model(s) | Sensors | Range | Resolution | Accuracy |
GD47AC / GD47B / LM47B | Temperature | -30 to 65°C | 0.1°C | ±0.4°C (+5 to +40°C) |
±1.0°C (-20 to +65°C) | ||||
±1.5°C (-30 to -20°C) | ||||
RH | 0-100% | 0.1% | ±2% (10 to 90%RH) | |
±4% (0 to 100%RH) | ||||
CO2 | 0-5000ppm | 3% | ±50ppm |
RF specification: | EN300-220 | |
RF power: | 10mW | |
Environment specification | ||
Compliant to EN300-220: | -10 to +55°C | |
Actual: | -30 to +65°C | |
Humidity: | 100% non condensing | |
Environmental rating: | IP40 | |
Dimensions (footprint): | 78 x 41mm | |
Transmission interval range: | 1 sec to 4 hours | |
Indicator (red LED): | transmit active/on/off | |
Control switch (concealed): | test mode / hibernate | |
Antenna socket: | SMA |
Gen II Quick Start Instructions
Air quality transmitters datasheet
GenII Logmitter
AQ110A
AQ112
AQ211