N5 tilt sensor with 360°measurement from elobau
02 November 2017
The N5 tilt sensor with CAN-bus inerface from elobau is the latest in a range of mercury free tilt sensors, and complements the single axis N3 and the dual axis N4.
Unlike the N3 and N4 which have a horizontal/vertical measuring range, the N5 has an increased measuring range of up to 360° on a single axis or 180° on a dual axis.Up to 4 additional configurable switching points are available, with each switching point having a selected on/off delay, and a neutral position that can be adjusted via infra-red remote control or the CAN-bus interface.
It has been designed to be easily installed in restricted areas with a flat and compact design and is robust enough for use on lifting platforms and telescopic ladders.
The tilt sensor has an IP67 protection rating, and a working temperature range of between -40°C and +85°C, and is available with either a Deutsch or M12 connector.
As the tilt sensor is based on MEMS technology, it is extremely reliable with a long service life, and the versatile nature of this sensor means it can be used in countless applications from material handling, off-highway vehicles and various industrial applications.
If you would like any more information on the N5 or any other product in elobau’s range of sensor, level measurement, operator controls or machine safety product portfolio, please contact elobau UK.
Other Press Releases By This Company
- 06/10/2021 - 424S expands the range of angle sensors at elobau
- 29/09/2021 - Sgariboldi I-CAB 2 with multifunctional armrest from elobau
- 23/09/2021 - Flexible, ergonomic and compact – the joystick grip for the J2 joystick
- 18/08/2021 - elobau – New Immersion Float Switch from elobau
- 30/06/2021 - Compatible, ergonomic and sustainable – the 225MA midi modular armrest enables efficient working
- 25/05/2021 - eloLounge opens virtual showroom
- 18/05/2021 - Level measurement using ultrasound – reliable and versatile
- 22/04/2021 - Flexible fill level sensor with an analogue signal – the new 298A fuel level sensor
- 22/03/2021 - Flexible, ergonomic and compact – the joystick grip for the J2 joystick
- 05/03/2021 - elobau are exhibiting at Hillhead Digital 2021
- 08/02/2021 - Economy for the Common Good – elobau publishes its 2020 report With a total score of 602 points, elobau has improved on its 2018 result by around 7%.
- 14/01/2021 - elobau receives the 'Environmental Award for Companies 2020' from the state of Baden-Württemberg
- 13/11/2020 - elobau are exhibiting at Bauma Shanghai 2020
- 12/11/2020 - elobau – New Immersion Float Switch from elobau
- 07/10/2020 - The Future of HMI is adaptive
- 14/09/2020 - elobau will exhibit at IVT Expo 2021
- 05/08/2020 - Elobau Joystick ensures precise control of concrete finishers
- 05/08/2020 - elobau will be back at Hillhead 2021
- 27/04/2020 - Alltrec and elobau - a durable electric vehicle with a chemical free weed eliminator
- 03/03/2020 - elobau are exhibiting at Hillhead 2020
- 25/02/2020 - A safe feeling during critical operations
- 06/02/2020 - elobau are exhibiting at Conexpo 2020
- 21/01/2020 - New Sales Engineer at elobau UK for Industrial and Off-Highway Applications
- 25/11/2019 - Industrial push buttons from elobau
- 14/11/2019 - A Modular Vehicle with a Modular Operating System
- 18/10/2019 - elobau are exhibiting at SPS 2019
- 10/10/2019 - N5 Tilt Sensor from elobau in solar powered race
- 05/09/2019 - elobau are exhibiting at Agritechnica 2019
- 13/08/2019 - Reliable and practical solutions for the agricultural sector with elobau's angle sensors and joysticks.
- 08/08/2019 - Ultrasonic sensors in the “Blue Battery”
- 08/07/2019 - Operator Controls for Industrial Applications from elobau
- 28/06/2019 - elobau – simple and reliable solutions for membrane distillation with elobau float switches
- 29/05/2019 - J7 joysticks put to the endurance test: precise drill control in the toughest outdoor environments
- 20/05/2019 - elobau are exhibiting at Plantworx 2019
- 20/05/2019 - Connectivity without Compromise from elobau
- 22/03/2019 - elobau – creating sustainable solutions
- 05/03/2019 - ATEX Sensors from elobau
- 04/03/2019 - Lightweight but heavy duty, the new joystick JS from elobau
- 08/02/2019 - elobau are exhibiting at Bauma 2019
- 21/01/2019 - Customised operator controls with CAN bus connection from elobau
- 04/12/2018 - elobau expands its executive board
- 15/11/2018 - elobau are exhibiting at Bauma China 2018
- 02/11/2018 - Hygienic machine safety products from elobau
- 22/10/2018 - elobau are exhibiting at SPS IPC Drives 2018
- 11/10/2018 - elobau are exhibiting at the Engineering Design Show 2018
- 11/09/2018 - Protect against dangers of food processing machines with contactless safety sensors from elobau
- 23/07/2018 - elobau will be exhibiting at the PPMA Show
- 06/07/2018 - Accurate and Ergonomic Machine Control with elobau
- 12/06/2018 - Customisable as standard – the new modular armrest MA225 midi from elobau
- 27/04/2018 - Efficient and fatigue-free order picking with elobau and STILL
- 06/04/2018 - Troubleshooting Safety Systems from around the world
- 21/03/2018 - New ‘Super Tool Carrier’ from Diverto with customised operator controls from elobau
- 12/03/2018 - elobau are exhibiting at Hillhead 2018
- 23/02/2018 - ATEX Safety Sensors from elobau
- 07/02/2018 - Precise, Versatile and Reliable – the new Ultrasonic Sensors from elobau
- 18/01/2018 - elobau to exhibit at NFPC Industry Open Day 2018
- 29/11/2017 - Fingertip joystick J1 from elobau
- 18/10/2017 - Hygienic machine safety products from elobau
- 22/09/2017 - eloProtect – the next generation of machine safety switches and connectors
- 07/09/2017 - Ultrasonic level measurement from elobau
- 29/08/2017 - Thumbwheels for Operational Control from elobau
- 11/08/2017 - elobau are exhibiting at the Engineering design show 2017
- 26/07/2017 - Suction Pipe with level monitoring from elobau
- 28/06/2017 - Production machinery refurbishment and upgrade improves efficiency.
- 26/05/2017 - The J4F – a Heavy Duty Joystick with safety electronics from elobau
- 12/05/2017 - elobau are exhibiting at Plantworx 2017
- 26/04/2017 - EloProtect "M" - Magnetic
- 19/04/2017 - Sensor Select – Configure Your Own Machine Safety Sensor
- 23/03/2017 - eloProtect ’E’ - RFID " machine safety made simple"
- 20/02/2017 - eloProg – The Modular Safety Controller from elobau – Flexible for Every Application
- 16/02/2017 - elobau to exhibit at Empack 2017
- 06/02/2017 - Elobau to exhibit at NFPC Industry Open Day 2017
- 15/12/2016 - elobau and Sparc Systems – manufacturing efficiency through innovation
- 02/12/2016 - M12 Stainless Steel Safety Sensor from elobau
- 02/12/2016 - IP69K Emergency Stop Buttons and Safety Relays from elobau
- 01/12/2016 - Safety Interlocks from elobau
- 01/12/2016 - Fingertip Joysticks from elobau
- 30/11/2016 - eloProtect – the next generation of machine safety switches
- 29/11/2016 - eloFlex – Configurable Safety Control Units from elobau
- 28/11/2016 - Compact Coded Magnetic Safety Switch from elobau
- 28/11/2016 - CANopen angle sensor from elobau
- 28/11/2016 - Float switches side mount from elobau
- 25/11/2016 - ‘Intelligent’ Input Expansion Unit with a PLd Performance Level from elobau
- 25/11/2016 - Analogue Float Level Sensor from elobau
- 24/11/2016 - The Compact ‘All in One’ Safety Switch from elobau
- 24/11/2016 - Zero Speed Monitor 480041H from elobau
