Latest news from JS Air Curtains

JS install Air Curtains at Membury Services

11 March 2010

JS Air Curtains has recently supplied eight air curtains to the Welcome Break Membury services on the M4.

Installed bu contractors Russell Air Conditioning, the eight air curtains help maintain internal temperatures even with the external doors in constant use. Five 2m Windbox air curtains and three HeatScreen air curtains are positioned at the front entrance, rear entrance and on some internal doorways.

Membury Services Facilities Manager, Ray Drinkwater;

“Without the air curtains the doors acted like a wind tunnel with the cold air blowing right through. The air curtains from JS were recommended by Russell Air Conditioning and have done a great job in stopping the cold air entering.”

In total the air curtains are capable of providing over 21,000m3/h of airflow to seal the doorways. As well as keeping the heat in during the winter, they can also be used with the heaters off in the summer to prevent air conditioned air from escaping.

The Windbox air curtain has a powerful output and can be used on doorways up to 3.5m high. It can be horizontally mounted above a doorway or vertically to the side. The units supplied to Welcome Break were white but the Windbox is available in any RAL colour to suit interior architecture.

The air curtain can incorporate electric or low pressure hot water heating and is controlled from either a five-speed wall mounted controller, supplied with 20m of plug and play RJ45 cable, or via a BMS system.

The other model used at Welcome Break was the HeatScreen air curtain. This is an economical air curtain with a maximum output of 1,670m3/h. It can be controlled either with the panel on the front of the unit or via a handheld remote control. It is available in lengths of 90cm, 120cm and 150cm, comes with two metres of electrical lead and can be wired to a single phase power supply.

JS Air Curtains supplies an extensive range of air curtains, as well as bespoke solutions, for all commercial and industrial applications. JS’ in-house project management division also provides a smooth, hassle-free installation service that walks the customer through from design specification to post-installed product training.

Other Press Releases By This Company