Approved Business Logo
Gift a Tree Reviews Articles FAQs
Login
EP21TDCHT-LO two part Epoxy adhesive/sealant from Master Bind Inc

12 November 2010 | Master Bond Inc

Master Bond two part Epoxy conforms with NASA outgassing specifications

The two part toughened Epoxy adhesive & sealant from specialists Master Bond, not only meets NASA outgassing specifications, but is also cryogenically serviceable.

Master Bonds'' EP21TDCHT-LO two part epoxy adhesive & sealant has been specially formulated for demanding applications where factors like temperature cycling, high vibration and mechanical shock are important factors. The versatile system is used for a wide variety of structural, electronic, aerospace, medical and oil & chemical processing applications.

EP21TDCHT-LO has a convenient mix ratio of 1:1 by weight or volume and is formulated to cure at room temperature or more rapidly at elevated temperatures. As a toughened system, EP21TDCHT-LO is particularly well suited for bonding dissimilar substrates, especially when there has been differing coefficients of expansion. It has an outstanding service temperature range from 4K to +350ºF.

Other notable features include a shear strength exceeding 2500 psi, a peel strength of greater than 20 pli and a Shore D hardness of greater than 60. The cured epoxy has excellent chemical resistance and is an electrical insulator.

Parts A and B are available in half pint, pint, quart, one gallon and five gallon containers.

Other Press Releases from Master Bond Inc

03/12/2025 - One Part 300°C Rated Silicone Passes Non-Cytotoxicity Standards MasterSil 800Med is a one component, moisture curing silicone specifically designed for medical device manufacturing.
23/9/2025 - Nanosilica Filled, Dual Curable Adhesive Offers Rapid Fixturing with LED Light Master Bond LED422DC90 is a one component, nanosilica filled dual cure adhesive system engineered for high-speed fixturing and bonding of opaque substrates.
19/6/2025 - One Part Silver Filled Electrically Conductive Epoxy Passes ISO 10993-5 Standard Master Bond EP3HTSDA-2Med is a true one component epoxy that is not pre-mixed and frozen. It offers an easy dispensing profile with an exceptionally long working life at room temperature, making it ideal for streamlining automated assembly. As a silver filled system, it exhibits high electrical conductivity (volume resistivity < 0.001 ohm-cm) and excellent thermal conductivity. This epoxy passes ISO 10993-5 for cytotoxicity and is designed for high-speed medical device manufacturing.
01/5/2025 - Toughened, UV Curable Adhesive Features Optical Clarity Master Bond UV15-7HP is a low viscosity, easy to apply, one-part, UV curable adhesive system. Optimal adhesion is achieved in bond line thicknesses of 0.001-0.003 inch, and it can cure rapidly with a minimum intensity of 20-40 milliwatts/cm2 using a UV light source emitting at a wavelength of 320-365 nm.
24/3/2025 - Non-Drip Cryogenic Epoxy Offers Electrical and Thermal Insulation Master Bond EP29LPSPND-3 is a two component, non-drip epoxy compound with a paste consistency that can be used for bonding and sealing applications.