Newton CDM 520 eco Floor - Basement Waterproofing Membrane for Waterproofing of Existing & New Build Basements

Polymer-modified, and fibre-reinforced, HydroCoat 203-RM is physically and chemically compatible with the host concrete, quickly exhibiting high adhesive and compressive strength. As a single component, requiring only the addition of water, the resulting mortar is rapid curing with enhanced polymeric properties and reliable strength development which is not significantly affected by low-temperature use.

The mortar can be used as supplied up to 100 mm deep, or it can be bulked out with sharp sand to form a high-performance screed or for floor or deck repairs up to maximum depth of 300 mm.

Surface preparation is required, as is protection after application - consult the manufacturer for details.

Features and benefits:

• Incorporates the latest proven cement chemistry, fibre and styrene acrylic copolymer technology.
• Reliable strength development, even at sub-zero temperatures, gives rapid return to service.
• Pre-packaged material only requires mixing with clean water. Can be bulked out with sand or aggregate.
• High bond strength exceeds tensile strength of concrete, thus ensuring monolithic performance of the repair.
• Sets in 10 minutes at 20°C yielding a durable, high strength mortar.
• Dense matrix resists 10 bar water pressure. Very high diffusion resistance to acid gases and chloride ions.
• Sulphate resistance to class DS-5/5m of BRE Special Digest 1 and ideally suited for sewage and wastewater applications.
• Portland cement base with physical properties of cured material similar to base concrete.
• Non-toxic when cured and is listed as authorised under Regulation 31 for use in the supply of drinking water.

Two-component solvent-free epoxy resin based floor coating developed to provide protective and decorative properties to concrete, steel and other substrates. After mixing together, an easily applied chemical and abrasion-resistant finish is produced.

• Chemical and Abrasion Resistance: Provides a durable, chemical-resistant finish that protects concrete, steel, and other substrates.
• Solvent-Free and Low Odour: Formulated without solvents, ensuring minimal odour during application for a more pleasant environment.
• Excellent Adhesion: Bonds strongly to concrete and steel surfaces, enhancing longevity and reliability.
• High Build Thickness: Offers a high build coating that provides substantial coverage and protection with fewer coats.
• Easy Application: Simple to apply after mixing components, facilitating quick installation and reducing downtime.
• Hygienic and Easy to Clean: Creates a fully sealed surface that is hygienic and easy to maintain, ideal for environments requiring cleanliness.

Key benefits:

• Solvent free, low odour.
• Provides a fully sealed surface with very good chemical resistance.
• Excellent adhesion to concrete and steel.
• High build.
• Tough and durable.
• Easily applied.
• Hygienic and easily cleaned.

Two-part, solvent-free and clear epoxy which is applied to damp and porous surfaces as a pre-primer prior to the application of Newton Epoxy DPM, a vapour barrier and primer for newly placed or damp concrete and screed.

The high-quality, epoxy formulation allows for application onto damp surfaces, whilst the low-viscosity penetrates deep into porous substrates to effectively seal the surface ready for the main primer application.

Newton Epoxy Primer is quick and simple to apply by brush or roller and can be applied over cementitious screeds and concrete just 7 days after placement.

Features and benefits:

• Very damp-tolerable.
• Can be applied to concrete and screed seven days after placement.
• Low viscosity.
• Solvent free.
• Provides an excellent vapour barrier.
• High-bond damp proof membrane (DPM) that provides a barrier to vapour and to prevent osmotic blistering.
• Life expectancy is equal to that of the surface it is applied to.

Suitable substrates:

• Indoor or outdoor floors of correctly formed, compacted and prepared:
• Concrete, at least seven days old;
• Screed, at least seven days old.