Safelane®
Safelane® from Safecote, installed by HMS Decorative Surfacing Limited as the leading UK Installer, is a specialist surface overlay system comprising of 1-3mm or 6-10mm aggregate and is applied using an epoxy resin.
The aggregate used in the overlay surface acts like a sponge, allowing de-icing chemicals to sink deep into the pores of the Safelane aggregate and is subsequently released slowly when the temperature drops to freezing point. Safelane also benefits from some of the same properties as other high friction surface treatments, deeming it suitable for areas requiring anti-skid surfacing.
This effectively means the surface would be protected from freezing over before gritters or salt application is required. Safelane surface overlay treatment has the ability to reduce the formation of frost and snow while protecting the base from corrosion and deterioration by ingress of chlorides and moisture. Safelane from Safecote is recommended for use on footbridges, cycle-ways, public transport boarding areas, loading bays, railway platforms, and approaches to toll barriers.
Visit our website for further information
View Product on Company Website
The aggregate used in the overlay surface acts like a sponge, allowing de-icing chemicals to sink deep into the pores of the Safelane aggregate and is subsequently released slowly when the temperature drops to freezing point. Safelane also benefits from some of the same properties as other high friction surface treatments, deeming it suitable for areas requiring anti-skid surfacing.
This effectively means the surface would be protected from freezing over before gritters or salt application is required. Safelane surface overlay treatment has the ability to reduce the formation of frost and snow while protecting the base from corrosion and deterioration by ingress of chlorides and moisture. Safelane from Safecote is recommended for use on footbridges, cycle-ways, public transport boarding areas, loading bays, railway platforms, and approaches to toll barriers.
Visit our website for further information
Other Products and Services from HMS Decorative Surfacing Ltd
Imprinted Surfacing
HMS® Imprinted Surfacing is a hot applied resin based compound. It is a modern alternative to Blocks, Slabs, and Cobbles.
It is comprised of a synthetic (non-bituminous) asphalt based compound, incorporating granite aggregate and graded rubber granules. This compound is also reinforced with metal and glass fibres.
Imprinted Surfacing is suitable for use on driveways, parkways and roads. It is suited to village gateways, heritage areas and for urban regeneration schemes. It comes in a wide range of colours and can replicate many patterns including block paving, cobbles granite sets and paving slabs.
Imprinted Surfacing from HMS® offers a modern and highly efficient alternative to traditional block paving and concrete Imprinted Surfacing. HMS® Resin based compound Imprinted will not suffer colour loss over time like some concrete products, and will not lift and move as with block paving. This makes it a popular choice for driveways and highly trafficked areas, especially in urban environments, as it offers an attractive finish combined with effective traffic claming.
Installation and surface preparation of Imprinted Surfacing is minimal in comparison to traditional methods, highly reducing traffic disruption.
Visit our website for further details
It is comprised of a synthetic (non-bituminous) asphalt based compound, incorporating granite aggregate and graded rubber granules. This compound is also reinforced with metal and glass fibres.
Imprinted Surfacing is suitable for use on driveways, parkways and roads. It is suited to village gateways, heritage areas and for urban regeneration schemes. It comes in a wide range of colours and can replicate many patterns including block paving, cobbles granite sets and paving slabs.
Imprinted Surfacing from HMS® offers a modern and highly efficient alternative to traditional block paving and concrete Imprinted Surfacing. HMS® Resin based compound Imprinted will not suffer colour loss over time like some concrete products, and will not lift and move as with block paving. This makes it a popular choice for driveways and highly trafficked areas, especially in urban environments, as it offers an attractive finish combined with effective traffic claming.
Installation and surface preparation of Imprinted Surfacing is minimal in comparison to traditional methods, highly reducing traffic disruption.
Visit our website for further details
Resin Paths
Resin surfaces can make a real difference to the visual appearance and drainage performance of your surfacing. They are an ideal alternative to traditional gravel, block pavers, slab. Our resin products come in a variety of colours.
High Friction Surfacing
High Friction Surfacing, more commonly known as ‘Anti-skid’ surfacing, is an epoxy resin process dressed with high PSV calcined bauxite aggregate.
HMS®High Friction Surfacing is available in either HAPAS/BBA Approved Type 1 Hot or Cold lay, and installed by HAPAS & BBA Approved installers.
Today, Hot Applied and Cold Applied are the two generic processes of High Friction Surfacing available and ‘Type 1’ accreditation is the highest quality standard, under the BBA (British Board of Agrément) certification scheme. HMS is accredited as a ‘BBA Approved Installer’ (Installer Number 5020).
Only ‘Type 1’ high friction surfacing processes are permitted on motorway and trunk roads. Both the product and the installer must be individually accredited for the installed high friction surfacing to conform to Clause 924 of the Specification For Highway Works.
Visit our website for further details
HMS®High Friction Surfacing is available in either HAPAS/BBA Approved Type 1 Hot or Cold lay, and installed by HAPAS & BBA Approved installers.
Today, Hot Applied and Cold Applied are the two generic processes of High Friction Surfacing available and ‘Type 1’ accreditation is the highest quality standard, under the BBA (British Board of Agrément) certification scheme. HMS is accredited as a ‘BBA Approved Installer’ (Installer Number 5020).
Only ‘Type 1’ high friction surfacing processes are permitted on motorway and trunk roads. Both the product and the installer must be individually accredited for the installed high friction surfacing to conform to Clause 924 of the Specification For Highway Works.
Visit our website for further details
HMS Decorative Surfacing Ltd
Unit 1, Evergreen Field Farm, Pincet Lane, North Kilworth, Leicestershire, LE17 6NE, United Kingdom
HMS Decorative Surfacing Ltd is a Midlands-based supplier of bespoke surfacing solutions for the UK’s leading contractors. Using our team of qualified in-house installers, we offer numerous surfacing methods for a range of purposes, providing a unique and innovative approach to all projects, whether domestic or commercial. We offer high-quality surfacing solutions that come in a variety of colours and materials, providing a smooth finish that is guaranteed to have lasting results.