O-Rings − Vulcanised Joined Rings
Whatever your requirements, industrial rubber specialist J-Flex can help with vulcanised joined cord rings (o-rings), that are ideal for sealing exterior lighting, security equipment, control boxes and filtration equipment. In fact any items that need to withstand the elements, wind, rain, cold weather, hot weather and more.
• Viton™ joined rings
• Silicone cord joined rings
• Nitrile rings
• EPDM rings
• Neoprene joined rings
Sponge materials are also available to fill uneven gaps and misalignments.
Vulcanised rings have no upper restrictions on inside diameter.
On larger joints we can achieve tight dimensional tolerances.
The minimum inside diameter limit is 100mm and cross section diameters range from 3mm to 30mm.
Whatever the size of O-ring / vulcanised joined ring you require, we can usually help.
View Product on Company Website
• Viton™ joined rings
• Silicone cord joined rings
• Nitrile rings
• EPDM rings
• Neoprene joined rings
Sponge materials are also available to fill uneven gaps and misalignments.
Vulcanised rings have no upper restrictions on inside diameter.
On larger joints we can achieve tight dimensional tolerances.
The minimum inside diameter limit is 100mm and cross section diameters range from 3mm to 30mm.
Whatever the size of O-ring / vulcanised joined ring you require, we can usually help.
Other Products and Services from J-Flex Rubber Products
Diaphragm & Thin Gauge Sheets
Our Diaphragm & Thin Gauge Rubber Sheetings include:
• Nitrile (NBR)
• Nitrile (NBR) with high strength Nylon (Polyamide) fabric
• Neoprene (CR)
• Neoprene (CR) with high strength Nylon (Polyamide) fabric
• Ethylene Propylene Diene Monomer (EPDM)
We also offer a wide selection of ‘special’ materials, sometimes available from stock, including the following reinforcing materials:
• Nylon • Polyester • Cotton • Nomex • Glass fibre
Diaphragm Sheet can be used in the following applications:
• Breathing Masks & Safety Protection Equipment
• Automotive Carburettors
• Gas Control & Valve Equipment
• L.P.G. & Methane Gas Actuators & Regulators
• Diesel & other fuel pumps
• Industrial Pumps
• Gas & Fuel metering equipment
• Flexible Sleeves & Connectors
• Nitrile (NBR)
• Nitrile (NBR) with high strength Nylon (Polyamide) fabric
• Neoprene (CR)
• Neoprene (CR) with high strength Nylon (Polyamide) fabric
• Ethylene Propylene Diene Monomer (EPDM)
We also offer a wide selection of ‘special’ materials, sometimes available from stock, including the following reinforcing materials:
• Nylon • Polyester • Cotton • Nomex • Glass fibre
Diaphragm Sheet can be used in the following applications:
• Breathing Masks & Safety Protection Equipment
• Automotive Carburettors
• Gas Control & Valve Equipment
• L.P.G. & Methane Gas Actuators & Regulators
• Diesel & other fuel pumps
• Industrial Pumps
• Gas & Fuel metering equipment
• Flexible Sleeves & Connectors
Flame Retardant Rubber
High performance, flame resistant, elastomer (rubber) materials and components.
Often described in a multitude of ways − Flame Resistant, Flame Retardent, Fire Resistant, Fire Retardent, LSLT (Low Smoke, Low Toxicity) − our wide range of products are sure to meet your requirements. We have ensured that our products have been fully tested. Not only are they approved to EN 45545-2 (required for rail refurbishers), we also have further fire related certifications.
All our materials have excellent environmental resistance, withstanding ozone, u.v., rain & frost, and are also resistant to corrosion, moisture, salt & light fuels.
Naturally, we also provide other sheetings and components where conformance with EN 45545-2 is not essential and can quote you for those also.
Often described in a multitude of ways − Flame Resistant, Flame Retardent, Fire Resistant, Fire Retardent, LSLT (Low Smoke, Low Toxicity) − our wide range of products are sure to meet your requirements. We have ensured that our products have been fully tested. Not only are they approved to EN 45545-2 (required for rail refurbishers), we also have further fire related certifications.
All our materials have excellent environmental resistance, withstanding ozone, u.v., rain & frost, and are also resistant to corrosion, moisture, salt & light fuels.
Naturally, we also provide other sheetings and components where conformance with EN 45545-2 is not essential and can quote you for those also.
Rubber Extrusions
Whatever your requirements, industrial rubber specialist J-Flex is the comprehensive source for all your rubber extrusions and rubber fabrications, whether you need small, medium or large volumes.
Usually produced in either solid or sponge premium grade silicone, we offer a choice of over 2,000 existing sections for sealing, silencing, insulating, channelling, and protection. Whether you are looking for tubing, sleeving, strips, cord, or complex profiles, we can supply the extrusion you need, whatever the specification. If you need something specific we can produce bespoke rubber extrusions, especially for you.
Do you have special extruded rubber requirements?
• High temperature adhesive backing can be added if required. (Please specify when you place your order).
• Cut to size service
• Can meet requests for particular lengths including longer ones.
• Lathe cut washers.
• EPDM, Neoprene and TPR grades available to order.
• Viton™ & FKM sponge strips & cords made to order.
Usually produced in either solid or sponge premium grade silicone, we offer a choice of over 2,000 existing sections for sealing, silencing, insulating, channelling, and protection. Whether you are looking for tubing, sleeving, strips, cord, or complex profiles, we can supply the extrusion you need, whatever the specification. If you need something specific we can produce bespoke rubber extrusions, especially for you.
Do you have special extruded rubber requirements?
• High temperature adhesive backing can be added if required. (Please specify when you place your order).
• Cut to size service
• Can meet requests for particular lengths including longer ones.
• Lathe cut washers.
• EPDM, Neoprene and TPR grades available to order.
• Viton™ & FKM sponge strips & cords made to order.
J-Flex Rubber Products
Units 1 & 2, London Road Business Park, Retford, Nottinghamshire, DN22 6HG, United Kingdom
J-Flex Rubber Products offers a wide range of products for all industries. Rubber Mouldings, Extrusions and Fabrications (including Gaskets, Sleeves, Inflatable Seals, Bellows, Expansion Joints & Vulcanised Joined O Rings). Also, Specialist Rubber Sheetings including Viton™ and FKM, Viton™ Sponge, EPDM, Diaphragm & Thin Gauge sheeting plus Food Safe, Metal Detectable, Electrically Conductive, Fire Retardant and other Silicone Sheetings and Sponges. Finally, our Vacuum Forming Materials such as membranes are widely used widely used in the Solar Industry alongside Furniture Lamination, Aerospace, Formula 1 and Marine applications.