Pump Tubing

Our Longer Pumps range of Syringe pumps are mainly for laboratory or OEM use.

The laboratory range of syringe pumps are available to infuse or withdraw liquids with syringe sizes from as little as 1 μL up to 100 ml.

Programming options allow for complex infusion or withdrawal processes and can include stepped functions, constant or ramped speed as well as a trigger dispense or periodic dispense.

Output signals from the pumps can show when a process has started or stopped as well as the direction. Further communication protocols can exist over RS232 or RS485.

A high pressure syringe pump allows for a linear force greater than 450N.

OEM syringe pumps allow for single and multi-channel applications.

Our range of Alicat pressure controllers is available with single or dual valves. They can be used in standard, vacuum, differential, closed loop and closed volume pressure applications.

The Alicat PC series range of pressure controllers have single control valves with different valve options dependent on your application.

The Alicat PCD series are dual valved pressure controllers. All pressure controllers are available with a remote pressure sense port should your process require it.

The PC and PCD series pressure controllers from Alicat are also available for more aggressive applications featuring all 316 stainless steel wetted parts and FFKM seal options.

Every single pressure controller from Alicat features an analogue output signal as well as RS232 data communications.

Steriflow Mark 95FT series is a sanitary “flow through” back pressure regulator, the flow through design allows greater application potential. The Mark 95FT BPR may eliminate sections of by-pass line components as it provides an installation in the primary line, allowing process fluid to bypass out of the bottom of the valve should an over pressurisation event occur.