Lee JELA® Lubrication Jets
Lee JELA® Lubrication Jets generate a straight, well-defined stream of fluid to a predetermined target with differential pressures of 10 to 200 psid. Lee JELA® Lubrication Jets are 100% tested for capture efficiency, guaranteeing that over 90% of flow will hit a predetermined target 2 inches away. These units are ideal for directing streams of lubricating oil at critical bearings or cooling oil at meshing gears, or fuel at the inside of vaporizing tubes in aircraft combustion chambers. Lubrication jets are available in four sizes from 0.125 to 0.343 of an inch with Lohm rates ranging from 200 to 7500 with a +/-15% tolerance. The 0.187 inch size is available with an integral safety screen and Lohm rate tolerance of +/-10%.
View Product on Company Website
Other Products and Services from Lee Products Ltd
Safety Relief Valves
Safety relief valves are designed to be fast-acting components that protect systems with the potential for sudden pressure spikes. These valves may sit dormant for indeterminate amounts of time before needing to be used, so it’s crucial that they always work as intended. Our safety relief valves are available in low-leak and tight hysteresis configurations. To ensure reliable operation, we 100% test each component for crack, flow point and reseat pressure.
Our safety relief valves are available in 0.187, 0.250, 0.281 and 0.375 inch insert diameters and 0.687 inch threaded configurations. They are constructed entirely of stainless steel and are available screened and unscreened. Built-in damping ensures quiet operation. Cracking pressures ranging from 20 to 5900 psid.
Our safety relief valves are available in 0.187, 0.250, 0.281 and 0.375 inch insert diameters and 0.687 inch threaded configurations. They are constructed entirely of stainless steel and are available screened and unscreened. Built-in damping ensures quiet operation. Cracking pressures ranging from 20 to 5900 psid.
Selective Shuttle Valves
This is our standard non-biased loose-ball design. Available in 0.187, 0.281, 0.375, and 0.500 inch diameters, these are the most economical configuration. The maximum shuttling pressure is just 1 psid. The valves are rated for leakage of fewer than 1 mL per minute.
Lee Bender Jet Multi-Orifice Restrictors
As the name suggests, Lee Bender Jets use multiple offset orifices in series. Each additional restriction causes an increased reduction in flow. This produces an effect that results in an increased minimum passage size for a given Lohm rate. The valve’s components are protected with two integral safety screens for bi-directional flow and are available calibrated to a ±5% tolerance in the range of 125 to 9500 Lohms.
Lee Products Ltd
3 High Street, Chalfont St Peter, Gerrards Cross, Buckinghamshire, SL9 9QE, United Kingdom
Part of The Lee Company, Lee Products are leaders in the development of miniature precision fluid control components, hydraulic components and mechanical components. Products include shuttle valves, safety screens, PRI, directional flow control and restrictors, plugs, checks and piloting solenoid valves, non-inert 2 & 3 way solenoid valves, high speed solenoid valves, variable & fixed displacement pumps, custom manifolds, static mixers and piezo valves.