Lee Components in Ring Locked Adapters

Virtually every 0.187, 0.250, and 0.281 inch diameter Lee insert is offered already installed in appropriately sized flared, flareless, or dynamic beam seal unions. These unions are made of 304 stainless steel (code “J” in military standards) or 6AL-4V Titanium (code “T”). All Lee Unions have a unique hex wrench arrangement to distinguish them from simple unions and permanent external marking to identify the insert.
The configuration of these unions has been carefully chosen to accommodate most of the 0.187, 0.250, and 0.281 inch Lee inserts, and yet maintain both minimum envelope and weight. These units incorporate the high-root radius UNJF threads to minimize stress concentrations with Class 3A tolerances. All fitting-end dimensions are, except for the internal diameters, in general accordance with the appropriate AS4375E4 and E6, AS4395E04 and E06, and AS85720/1-04 and −06 specifications.
Every Lee Union with an insert installed is proof pressure tested; flared and flareless to 6000 psid and dynamic beam seal to 16,000 psid. Maximum working differential pressure is a function of the particular Lee insert specified (refer to the appropriate insert section).

The Hi-Q PRV is designed for applications that require both a high relief pressure and a high flow rate in a line removable unit (LRU). The valve is offered with minimum cracking pressures from 1000 to 5400 psid and flow rates over 19 GPM, and uses a side inlet flow path to minimize the installation boss size and weight.

Lee HI-BAR Inlet Safety Screens save space and weight by incorporating the inlet screen directly into the boss fitting end rather than the more traditional approach of having the inlet screen installed in the manifold directly below the fitting. This unique design also offers greater flow and dirt holding capacity than a design that completely encapsulates the screen in the fitting. Lee HI-BAR Inlet Safety Screens are machined entirely from 15-5PH stainless steel and are rugged enough to withstand pressure differentials up to 6000 psi without burst or collapse. Each component is 100% proof pressure tested before shipment to ensure reliable performance. These screens are available in -4, -6, -8, and -10 configurations (AS33514 flareless tube to AS930 port fitting ends), which can be installed into a standard boss per AS33649 or equivalent. Eight standard hole sizes ranging from 50 to 500 micron are available.