SEC-Elite Programmable Multi-Line Gas Proving Detection System
The SEC-Elite is a programmable multi-line gas proving and detection system capable of pressure proving 4 gas lines and monitoring up to 8 detectors from a single panel.
View Product on Company Website
Other Products and Services from Medem
CM2M-K Current Monitor
Each CM2M-K can be used to interlock 2 fans, the fans are connected by taking the live feed for each fan through the current monitor (before any speed controllers/inverters).
Fan load sensitivity range on each fan is 30 milliamps to 24 amps (max).
Features and Details:
There are 3 LED indications:
1x Green, for the 12-volt power to the CM2M-K.
2x Red, one for ‘Fan A’ and another for ‘Fan B’ load detection.
When the fans are switched on and the load is detected (installation instructions) the corresponding side’s NO/NC contact will close and the red LED will light, this will flash for the first 15 minutes after current detection and then become solid. The flashing LED helps us to identify a fan intermittently stalling.
Fan load sensitivity range on each fan is 30 milliamps to 24 amps (max).
Features and Details:
There are 3 LED indications:
1x Green, for the 12-volt power to the CM2M-K.
2x Red, one for ‘Fan A’ and another for ‘Fan B’ load detection.
When the fans are switched on and the load is detected (installation instructions) the corresponding side’s NO/NC contact will close and the red LED will light, this will flash for the first 15 minutes after current detection and then become solid. The flashing LED helps us to identify a fan intermittently stalling.
SEC-B v5 Boiler Room Gas Pressure Proving System
The SEC-B is a multi-function solution designed for boiler rooms. The panel can monitor up to 6 detectors directly and up to 16 when installed with an AD-PP power pack.
AGDS-Elite Modular, Programmable Gas Detection System
The AGDS-elite is a modular, programmable, gas detection system capable of accepting up to 32 detectors (with the use of extension panels) for the monitoring of common and exotic gases with settable alarms for peak and time-weighted levels.
Medem
Project House, 19 Dallimore Road, Roundthorn Industrial Estate, Manchester, Lancashire, M23 9NX, United Kingdom
At Medem, we design, manufacture, and support gas safety and air quality control solutions with decades of experience and a strong focus on technical and regulatory standards. Our factory, near Manchester Airport, is open for visits, reflecting our pride in our products and the warranties we offer−5 years on all main panels and 10 years when commissioned by Medem. Our offerings include gas pressure proving systems using a patented differential method for accuracy, gas detection and monitoring systems.