Pro-Elite Modular, Programmable Gas Detection System
The Pro-elite is a modular, programmable, gas detection system capable of accepting up to 32 detectors for the monitoring of common and exotic gases with settable alarm for peak and time-weighted levels.
View Product on Company Website
Other Products and Services from Medem
GPPS-evo v4 Laboratory Gas Pressure Proving System
The GPPS-evo v4 is a laboratory gas pressure proving system with the ability to monitor up to four gas sensors.
Propane C3H8 (LPG)
Propane is a colourless gas which is heavier than air gas and will therefore sink and stay at a low level when released to the atmosphere.
Detector location should be at lower levels (approx 20 cm to 30cm from the floor).
Detectors are set to alert at a pre-alarm level of 5% LEL and high-alarm of 10% LEL.
Propane is a colourless, flammable heavier than air gas.
Propane is commonly used as a fuel and is one of a group of liquefied petroleum gases.
Detector location should be at lower levels (approx 20 cm to 30cm from the floor).
Detectors are set to alert at a pre-alarm level of 5% LEL and high-alarm of 10% LEL.
Propane is a colourless, flammable heavier than air gas.
Propane is commonly used as a fuel and is one of a group of liquefied petroleum gases.
Gas Pressure Proving
Each Medem proving system features our patented differential gas pressure proving method, the only true non-assumptive approach for performing downstream integrity checks. These systems provide accuracy and reliability by directly measuring pressure differentials during the test.
Our proving systems are versatile and can be configured for various gas pressures up to 10 bar, with optional degreasing for use with oxygen supplies. Gas detection and ventilation interlocking depending on the intended application is included.
Our proving systems are versatile and can be configured for various gas pressures up to 10 bar, with optional degreasing for use with oxygen supplies. Gas detection and ventilation interlocking depending on the intended application is included.
Medem
Project House, 19 Dallimore Road, Roundthorn Industrial Estate, Manchester, Lancashire, M23 9NX, United Kingdom
At Medem, we design, manufacture, and support gas safety and air quality control solutions with decades of experience and a strong focus on technical and regulatory standards. Our factory, near Manchester Airport, is open for visits, reflecting our pride in our products and the warranties we offer−5 years on all main panels and 10 years when commissioned by Medem. Our offerings include gas pressure proving systems using a patented differential method for accuracy, gas detection and monitoring systems.