ATEX Detectors
ATEX and IECEx gas detectors are specialized safety devices designed to detect hazardous gases in environments where explosive atmospheres may occur. Certified under the ATEX (ATmosphères EXplosibles) directive and the IECEx (International Electrotechnical Commission Explosive) scheme, these detectors meet rigorous international safety standards, ensuring reliable performance in high-risk areas.
Can we supply a range of ATEX and IECEx detectors for use with our systems, please contact us with your requirements and we can guide you to the best solution for your application.
View Product on Company Website
Can we supply a range of ATEX and IECEx detectors for use with our systems, please contact us with your requirements and we can guide you to the best solution for your application.
Other Products and Services from Medem
CM2M-K Current Monitor
Each CM2M-K can be used to interlock 2 fans, the fans are connected by taking the live feed for each fan through the current monitor (before any speed controllers/inverters).
Fan load sensitivity range on each fan is 30 milliamps to 24 amps (max).
Features and Details:
There are 3 LED indications:
1x Green, for the 12-volt power to the CM2M-K.
2x Red, one for ‘Fan A’ and another for ‘Fan B’ load detection.
When the fans are switched on and the load is detected (installation instructions) the corresponding side’s NO/NC contact will close and the red LED will light, this will flash for the first 15 minutes after current detection and then become solid. The flashing LED helps us to identify a fan intermittently stalling.
Fan load sensitivity range on each fan is 30 milliamps to 24 amps (max).
Features and Details:
There are 3 LED indications:
1x Green, for the 12-volt power to the CM2M-K.
2x Red, one for ‘Fan A’ and another for ‘Fan B’ load detection.
When the fans are switched on and the load is detected (installation instructions) the corresponding side’s NO/NC contact will close and the red LED will light, this will flash for the first 15 minutes after current detection and then become solid. The flashing LED helps us to identify a fan intermittently stalling.
GPPS-evo v4 Laboratory Gas Pressure Proving System
The GPPS-evo v4 is a laboratory gas pressure proving system with the ability to monitor up to four gas sensors.
SafeSpace V Gas Detection System with Valve Isolation
The SafeSpace V is a gas detection system which can monitor the atmosphere for CH4, LPG, CO, CO2 and Oxygen Depletion when fitted with the appropriate Medem detectors.
Medem
Project House, 19 Dallimore Road, Roundthorn Industrial Estate, Manchester, Lancashire, M23 9NX, United Kingdom
At Medem, we design, manufacture, and support gas safety and air quality control solutions with decades of experience and a strong focus on technical and regulatory standards. Our factory, near Manchester Airport, is open for visits, reflecting our pride in our products and the warranties we offer−5 years on all main panels and 10 years when commissioned by Medem. Our offerings include gas pressure proving systems using a patented differential method for accuracy, gas detection and monitoring systems.