SafeAir (GP) Gas Proving and Ventilation Interlocking for Commercial Kitchens
The SafeAir (GP) offers a simple cost-effective panel for ventilation interlocking and gas pressure proving in a commercial kitchen.
It is designed for use within commercial kitchens, to aid sites in meeting BS6173:2020 and IGEM/UP19. It can also monitor for air quality when fitted with the required detectors with Carbon Dioxide PPM levels displayed on the LCD.
Gas proving must be fitted in any commercial kitchen which has appliances fitted without flame failure devices (FFD’s). As explained further in the article “why fit gas pressure proving in a commercial kitchen?” gas proving should be considered for the long-term benefit and safety of the site when considering other gas standards and that the majority of leaks identified are before the FFD’s.
View Product on Company Website
It is designed for use within commercial kitchens, to aid sites in meeting BS6173:2020 and IGEM/UP19. It can also monitor for air quality when fitted with the required detectors with Carbon Dioxide PPM levels displayed on the LCD.
Gas proving must be fitted in any commercial kitchen which has appliances fitted without flame failure devices (FFD’s). As explained further in the article “why fit gas pressure proving in a commercial kitchen?” gas proving should be considered for the long-term benefit and safety of the site when considering other gas standards and that the majority of leaks identified are before the FFD’s.
Other Products and Services from Medem
Gas Detectors
We have a wide range of gas detectors available from common use gases to specialised reactive gases with options suitable for ATEX applications.
Being a design and manufacturer we are always expanding our range of detectors, if you require something which isn't currently listed then please contact use as we can most likely quickly meet your requirements.
Being a design and manufacturer we are always expanding our range of detectors, if you require something which isn't currently listed then please contact use as we can most likely quickly meet your requirements.
Ventilation Interlocking Systems
Our ventilation and gas interlocking systems are specifically designed for commercial kitchens to maintain a safe and compliant working environment. These systems provide ventilation interlocking, gas proving, and gas detection capabilities that can confirm ventilation status, perform pressure tests on pipework and appliances, and monitor for a rise in CO² levels.
CM2M-K Current Monitor
Each CM2M-K can be used to interlock 2 fans, the fans are connected by taking the live feed for each fan through the current monitor (before any speed controllers/inverters).
Fan load sensitivity range on each fan is 30 milliamps to 24 amps (max).
Features and Details:
There are 3 LED indications:
1x Green, for the 12-volt power to the CM2M-K.
2x Red, one for ‘Fan A’ and another for ‘Fan B’ load detection.
When the fans are switched on and the load is detected (installation instructions) the corresponding side’s NO/NC contact will close and the red LED will light, this will flash for the first 15 minutes after current detection and then become solid. The flashing LED helps us to identify a fan intermittently stalling.
Fan load sensitivity range on each fan is 30 milliamps to 24 amps (max).
Features and Details:
There are 3 LED indications:
1x Green, for the 12-volt power to the CM2M-K.
2x Red, one for ‘Fan A’ and another for ‘Fan B’ load detection.
When the fans are switched on and the load is detected (installation instructions) the corresponding side’s NO/NC contact will close and the red LED will light, this will flash for the first 15 minutes after current detection and then become solid. The flashing LED helps us to identify a fan intermittently stalling.
Medem
Project House, 19 Dallimore Road, Roundthorn Industrial Estate, Manchester, Lancashire, M23 9NX, United Kingdom
At Medem, we design, manufacture, and support gas safety and air quality control solutions with decades of experience and a strong focus on technical and regulatory standards. Our factory, near Manchester Airport, is open for visits, reflecting our pride in our products and the warranties we offer−5 years on all main panels and 10 years when commissioned by Medem. Our offerings include gas pressure proving systems using a patented differential method for accuracy, gas detection and monitoring systems.