Bunded Fuel Dispensers
- Totally enclosed bunded tank with integral pump and nozzle
- Simple to install, it should be situated on a firm base without the need for ladders
- Easily accessible for clean, safe filling and dispensing of fuel
- Manufactured from robust ribbed top quality Polythylene, will never rot or rust
- Fitted with the pro-active fuel monitoring system Watchman Plus, which is also compatible with the acclaimed Fullstop alarm system
- Independantly tested and licensed by OFTEC to confirm compliance with the European standard OFS T100 (OFCERT License No. 0642069817)
- Guaranteed for 10 years
View Product on Company Website
- Simple to install, it should be situated on a firm base without the need for ladders
- Easily accessible for clean, safe filling and dispensing of fuel
- Manufactured from robust ribbed top quality Polythylene, will never rot or rust
- Fitted with the pro-active fuel monitoring system Watchman Plus, which is also compatible with the acclaimed Fullstop alarm system
- Independantly tested and licensed by OFTEC to confirm compliance with the European standard OFS T100 (OFCERT License No. 0642069817)
- Guaranteed for 10 years
Other Products and Services from Safety Unlimited
Dual Purpose Storage Units
E-DPSU48/12C
- Designed to prevent environmental pollution and hazardous situations by containing accidental spills
- Designed for the storage on 205 litre drums & 1000 litre IBCs
- All units are welded for added strength
- Constructed from 2mm profiled mild Steel Sheet over 100 x 50 x 3mm RHS
- Fully welded leakproof sump over entire base area to a depth of 220mm
- High and low level vents
- Padlockable sliding doors (E-DPSU64/16C & E-DPSU96/24C has sliding doors on both long sides).
- Removable Galvanised grid shelving available as an additional cost option
- Upper and lower levels have support bearers
- These units comply with the Control of Pollution (Oil Storage) (England) - Regulations 2001, The Water Environment (Oil Storage) (Scotland) Regulations 2001, E.A. Guidance Note PPG26, The Health & Safety Executives Guidelines for the Storage Of Flammable Liquids HSG51 and current Health, Safety & Environmental regulations.
- Storage units can be custom made to suit your storage requirements.
- Optional extras include:- Insulation, Heating, Temperature Control, Lighting & Fire Detection.
- Contact our Sales Office for a No Obligation site survey.
- Designed to prevent environmental pollution and hazardous situations by containing accidental spills
- Designed for the storage on 205 litre drums & 1000 litre IBCs
- All units are welded for added strength
- Constructed from 2mm profiled mild Steel Sheet over 100 x 50 x 3mm RHS
- Fully welded leakproof sump over entire base area to a depth of 220mm
- High and low level vents
- Padlockable sliding doors (E-DPSU64/16C & E-DPSU96/24C has sliding doors on both long sides).
- Removable Galvanised grid shelving available as an additional cost option
- Upper and lower levels have support bearers
- These units comply with the Control of Pollution (Oil Storage) (England) - Regulations 2001, The Water Environment (Oil Storage) (Scotland) Regulations 2001, E.A. Guidance Note PPG26, The Health & Safety Executives Guidelines for the Storage Of Flammable Liquids HSG51 and current Health, Safety & Environmental regulations.
- Storage units can be custom made to suit your storage requirements.
- Optional extras include:- Insulation, Heating, Temperature Control, Lighting & Fire Detection.
- Contact our Sales Office for a No Obligation site survey.
Gas Cylinder Storage
Gas Cylinder Stores
E-GCS30: For the safe storage of Gas Cylinders
- Constructed fron 2mm Profiled Mild Steel over 50 x 50 x 3mm RHS
- Galvanised sloping roof
- Solid Tread Plate floor
- Padlockable mesh doors
- Ramp for easy access
- Finished in corrosion resistant paint RAL 3020 Red
- If this product does not meet your requirements, ask about our Custom Build Service
E-GCS30: For the safe storage of Gas Cylinders
- Constructed fron 2mm Profiled Mild Steel over 50 x 50 x 3mm RHS
- Galvanised sloping roof
- Solid Tread Plate floor
- Padlockable mesh doors
- Ramp for easy access
- Finished in corrosion resistant paint RAL 3020 Red
- If this product does not meet your requirements, ask about our Custom Build Service
Personal Protection Equipment - Boilersuits
- PW-C813: Two zipped chest pockets, Two side and Hip pockets, Hammer Loop, Zip Front, Fabric: Kingsmill 245g, Available in Royal Blue
- PW-S802: Two side and access pockets, One chest pocket with flap, Concealed stud front, Elasticated back waist, Fabric: Kingsmill 245g, Available in Navy
- PW-S841: Standard Apron available in Black, Navy, White and Royal Blue, One size fits all, 65% polyester 35% cotton
- PW-C031: Flame Retardant, Two zip front pockets, Two side and hip pockets. Zip Front, Available in Royal Blue
- PW-C032: Flame retardent to EN531, Two zip front pockets, Two side and hip pockets, Available in Orange
- PW-S802: Two side and access pockets, One chest pocket with flap, Concealed stud front, Elasticated back waist, Fabric: Kingsmill 245g, Available in Navy
- PW-S841: Standard Apron available in Black, Navy, White and Royal Blue, One size fits all, 65% polyester 35% cotton
- PW-C031: Flame Retardant, Two zip front pockets, Two side and hip pockets. Zip Front, Available in Royal Blue
- PW-C032: Flame retardent to EN531, Two zip front pockets, Two side and hip pockets, Available in Orange
Safety Unlimited
Unit 2, 40 Comet Way, Southend-on-Sea, Essex, SS2 6XW, United Kingdom
Safety Unlimited are leading UK specialists in the supply of storage, handling and containment products for hazardous materials and flammable liquids. Products include safety storage cabinets, spill pallets, absorbents, drum storage units, IBCs, gas cylinder safety stores, spill kits, safety cans and personal protective clothing.