Resbuild Floorseal
Ultra-low viscosity solvent based Epoxy sealer
As a sealer and surface hardener for cementitious systems in factories, garages, engineering workshops, abattoirs, dairies, etc., and on external slabs subjected to weathering and heavy traffic.
Resbuild Floorseal is a two pack, solvented Epoxy resin, which penetrates into the pore structure of concrete or masonry to leave a sealed, surface-hardened, dust proof finish with greatly increased chemical resistance. The material is easy to mix and apply, and is supplied in a convenient 1:1 volume mix ratio.
Resbuild Floorseal cures in a two stage operation:
• physical drying i.e. evaporation of the solvent, followed by,
• a chemical reaction between the active ingredients of the Base and Curing Agent components
Advantages
- Penetrates deeply (typically 6-9mm)
- Dust-proofs and surface hardens floors
- Seals against ingress of water, chemicals, etc
- Enhances abrasion resistance
- 1:1 Volume mix
- Long pot life
- Fast Drying
- Taint free after application
- Provides easy to clean surfaces
- Suitable for external application
View Product on Company Website
As a sealer and surface hardener for cementitious systems in factories, garages, engineering workshops, abattoirs, dairies, etc., and on external slabs subjected to weathering and heavy traffic.
Resbuild Floorseal is a two pack, solvented Epoxy resin, which penetrates into the pore structure of concrete or masonry to leave a sealed, surface-hardened, dust proof finish with greatly increased chemical resistance. The material is easy to mix and apply, and is supplied in a convenient 1:1 volume mix ratio.
Resbuild Floorseal cures in a two stage operation:
• physical drying i.e. evaporation of the solvent, followed by,
• a chemical reaction between the active ingredients of the Base and Curing Agent components
Advantages
- Penetrates deeply (typically 6-9mm)
- Dust-proofs and surface hardens floors
- Seals against ingress of water, chemicals, etc
- Enhances abrasion resistance
- 1:1 Volume mix
- Long pot life
- Fast Drying
- Taint free after application
- Provides easy to clean surfaces
- Suitable for external application
Other Products and Services from Resin Building Products Ltd
Resbuild MMA Jointseal
MMA based sealant for saw cut joints
To seal floor joints in food factories and warehouses where heavy vehicular trafficking occurs.
Resbuild MMA Jointseal is a light grey, two pack, pourable, flexibilised Methacrylate sealant. The consistency of the mixed sealant allows direct pouring of the sealant into horizontal joints. Resbuild MMA Jointseal is hard and tough enough to protect arris edges from heavy wheel loading, but possesses sufficient flexibility to accommodate a degree of movement (10% of the joint width). Resbuild MMA Jointseal is particularly suitable for filling saw cut joints in long strip floor construction.
Advantages
- Excellent adhesion to concrete
- Tough and resilient
- Suitable for wide joints
- Highly resistant to water
- Easy to apply
- Fast curing, even at very low temperatures
- Hygienic and easily cleanable
To seal floor joints in food factories and warehouses where heavy vehicular trafficking occurs.
Resbuild MMA Jointseal is a light grey, two pack, pourable, flexibilised Methacrylate sealant. The consistency of the mixed sealant allows direct pouring of the sealant into horizontal joints. Resbuild MMA Jointseal is hard and tough enough to protect arris edges from heavy wheel loading, but possesses sufficient flexibility to accommodate a degree of movement (10% of the joint width). Resbuild MMA Jointseal is particularly suitable for filling saw cut joints in long strip floor construction.
Advantages
- Excellent adhesion to concrete
- Tough and resilient
- Suitable for wide joints
- Highly resistant to water
- Easy to apply
- Fast curing, even at very low temperatures
- Hygienic and easily cleanable
Resbuild MMA Flexcoat
Flexible coating for asphalt type surfaces
As a tough durable slip resistant coating for Tarmac, Asphalt and Concrete type surfaces. e.g. parking bays, ramps, cycle paths, driveways, steps, etc.
Resbuild MMA Flexcoat is a two pack, fast curing flexible coating usually for Tarmac and Asphalt surfaces. Concrete surfaces may also be treated, following suitable preparation and priming. Designed to provide a dust free, seamless floor finish with protective and decorative properties. The flexible coating maybe enhanced by the incorporation of suitable anti slip dressing aggregate. Resbuild MMA Flexcoat allows a fast return to service.
Advantages
- Tough and abrasion resistant
- Very good chemical resistance
- Rapid curing minimises down time
- Easily applied
- Hygienic and easily cleaned
- Cures at low temperatures
- Flexible
- Range of decorative colours
As a tough durable slip resistant coating for Tarmac, Asphalt and Concrete type surfaces. e.g. parking bays, ramps, cycle paths, driveways, steps, etc.
Resbuild MMA Flexcoat is a two pack, fast curing flexible coating usually for Tarmac and Asphalt surfaces. Concrete surfaces may also be treated, following suitable preparation and priming. Designed to provide a dust free, seamless floor finish with protective and decorative properties. The flexible coating maybe enhanced by the incorporation of suitable anti slip dressing aggregate. Resbuild MMA Flexcoat allows a fast return to service.
Advantages
- Tough and abrasion resistant
- Very good chemical resistance
- Rapid curing minimises down time
- Easily applied
- Hygienic and easily cleaned
- Cures at low temperatures
- Flexible
- Range of decorative colours
Resbuild Tufscreed
Heavy duty Epoxy screed
Seamless protective and decorative, thin section screeds for food factories, dairies, abattoirs, plating ships, hospitals, sugar refineries, breweries, chemical bunds etc.
Resbuild Tufscreed is a three pack Epoxy resin based floor screed designed for application at 4-6mm thickness. Resbuild Tufscreed comprises a Base component, a Curing Agent component and a specially graded Aggregate component. Resbuild Tufscreed is easy to apply and does not stick to the trowel. Resbuild Tufscreed is non-dusting, chemical and abrasion resistant, non-slip in nature and may be rapidly opened to traffic.
Advantages
- Highly durable
- Abrasion and impact resistant
- Non-slip
- Easily maintained
- Excellent chemical resistance
- Low odour
Seamless protective and decorative, thin section screeds for food factories, dairies, abattoirs, plating ships, hospitals, sugar refineries, breweries, chemical bunds etc.
Resbuild Tufscreed is a three pack Epoxy resin based floor screed designed for application at 4-6mm thickness. Resbuild Tufscreed comprises a Base component, a Curing Agent component and a specially graded Aggregate component. Resbuild Tufscreed is easy to apply and does not stick to the trowel. Resbuild Tufscreed is non-dusting, chemical and abrasion resistant, non-slip in nature and may be rapidly opened to traffic.
Advantages
- Highly durable
- Abrasion and impact resistant
- Non-slip
- Easily maintained
- Excellent chemical resistance
- Low odour
Resin Building Products Ltd
Resbuild House, Unit 4, Durham Lane, Armthorpe, Doncaster, South Yorkshire, DN3 3FE, United Kingdom
Resin Building Products Ltd (Resbuild), based in Doncaster, South Yorkshire are specialists in resin based building products such as epoxy flooring, floor paint, resin screeds and anti-slip coatings. We also offer unrivalled customer support and advice to help you correctly specify the product you require for your project.