Reliance RWC Blue 2116 Rubber Seat Pressure Relief Expansion Cartridge 5 Bar ZRC214048

The Kunkle Bailey 616D safety relief valve is a spring-operated, high-capacity safety valve specifically designed for low-pressure air applications.

Commonly utilised on blowers or bulk transfer vehicles for road and rail transport, the Kunkle Bailey 616D safety relief valve offers essential overpressure protection for positive displacement air blowers, as well as associated tanks and pressure vessels.

Features:

• Engineered to provide precise relieving and re-seating pressures.
• Protected open discharge facilitates downward flow.
• Non-stick seating surfaces ensure a positive shut-off and prevent sticking.
• A combination of aluminium and gunmetal offers a lightweight yet extremely robust construction.

Specifications:

• Material: Body - Aluminium / Trim - PTFE & Bronze
• Sizes: 1.1/2" to 2" (DN40 to DN50)
• Connections: BSP Female inlet x Open discharge outlet
• Medium: Air
• Pressure Range: 0.2 to 2.5 barg (2.9 to 36.3 psig)
• Temperature Range: -30°C to 200°C

The Kunkle Bailey 616D safety relief valve is the ideal solution for maintaining safety and efficiency in your low-pressure air systems, ensuring reliable performance in various applications.

Four-Port, Stainless Steel Barstock, Single Stage Cylinder Regulator for High Purity Gas Applications

The CONCOA 322 Series single-stage regulator is designed for primary pressure control of high purity gases (up to grade 5.5) and mildly reactive gases. It is not suitable for toxic or highly corrosive gases. Single-stage regulators are recommended for applications that can tolerate small fluctuations in outlet pressure due to cylinder depletion, or where the inlet pressure is stable or below 500 PSIG (34 BAR).

Features

• 316L stainless steel diaphragm to prevent inboard diffusion

• CAPSULE® seat design with integral 360° filtration

• Low wetted surface area to reduce purge requirements

• Rear panel mount simplifies installation

• Spectrometric helium leak check ensures leak integrity

Specifications

• Max inlet pressure (bare body): 3000 PSIG (210 BAR); optional 3500 PSIG (240 BAR) or 4500 PSIG (310 BAR)

• Body: 316L stainless steel barstock

• Bonnet: Chrome-plated, die-cast zinc

• Gauges: 2 in (50 mm) diameter stainless steel with plated case

• Seats: PTFE (first stage); PCTFE (second stage)

• Filter: Patented 10-micron 316 stainless steel mesh

• Temperature range: -40°F to 140°F (-40°C to 60°C)

• Diaphragm: 316L stainless steel

• Cv: 0.1

• Helium leak integrity: 1×10⁻⁸ scc/sec

• Internal seals: PTFE

• Ports (bare body): 1/4 in FNPT

• Conformances: CGA G‑4.1; PED 2014/68/EU; ANSI/ASME B40.1; CRN OH5216

Introducing the Resideo FV300 Float Controlled Filling Valve, an essential solution for water supply systems in both industrial and commercial applications. This valve is designed for efficient filling of reservoirs, tanks, and cisterns. Its operation is managed through a float valve linked to the main storage medium via impulse link pipework. To prevent continuous filling, the valve features a pilot valve that can be finely adjusted, allowing for varying differential fill levels that control the valve’s opening and closing mechanism.

**Certifications**

• DVGW
• WRAS (up to 23 °C)

**Key Features**

• High flow capacity
• Durable powder-coated finish, both inside and out, using safe and non-toxic materials
• Integrated control circuit and ball valves
• Built-in fine filter
• No external energy source required for operation
• Compact and lightweight design

**Available Part Numbers:**

FV300-50A, FV300-65A, FV300-80A, FV300-100A, FV300-150A, FV300-200A

For reliable filling solutions, choose the Resideo FV300 Filling Valve for your water management needs.