Reliance FBSP Bronze Ball Valve - Butterfly Handle

The CONCOA 308 Series is an electrically-heated, single-stage regulator designed for high-flow carbon dioxide and nitrous oxide in laboratory applications. To prevent freeze-up caused by dry ice formation at high flows, it features three integral 50-watt heating cartridges, a primary thermostat for automatic temperature control, and a secondary safety thermostat cutout that heats the regulator seat directly. The 308 Series can be factory-configured with options such as single-station manifolds, purge, low-pressure alarms, or multiple inlets.

Features:

• Three 50W heaters maintain gas flows up to 350 SCFH (165 LPM)

• NEMA 4 housing for safe indoor/outdoor use

• 316L stainless steel diaphragm prevents inboard diffusion

• CAPSULE® seat design with 360° integral filtration

• Low wetted surface area reduces purge requirements

• Spectrometric helium leak-tested for integrity

Specifications:

• Max inlet pressure: 3000 PSIG (210 BAR); optional 3500 PSIG (240 BAR) or 4500 PSIG (310 BAR)

• Body & bonnet: Chrome-plated brass barstock

• Gauges: 2" (50 mm) plated case

• Seats: PTFE; PCTFE for higher-pressure options

• Filter: 10-micron sintered bronze

• Diaphragm: 316L stainless steel; Cv: 0.1

• Helium leak integrity: 1 × 10⁻⁸ scc/sec

• Electrical housing: NEMA 4; thermostat range: 95–120°F (35–49°C)

• Heaters: 3 × 50W; Power: 115V AC (100–127V 50/60Hz, 150W) or 230V AC (197–252V 50/60Hz, 150W)

• Internal seals: PTFE; Ports: 1/4" FNPT

• Compliance: Meets/exceeds CGA G-4.1, PED 2014/68/EU, CE (230V models), ANSI/ASME B40.1, CRN OH5216

**Features & Benefits of Hattersley Strainers** - Say goodbye to the issues caused by contaminants in piping systems with Hattersley strainers. - Our strainers feature WRAS-approved internal and external epoxy powder coating for enhanced durability. - Equipped with WRAS-approved gaskets to ensure a secure and reliable seal. **Specifications** - End flanges conform to BS EN 1092-2 PN16, Section 3.2, Table 11, featuring a raised face and typically supplied pre-drilled. - Each strainer comes with a stainless steel perforated element, designed with 1.5mm diameter holes for optimal filtration. - Please note that this product is unsuitable for use with group 2 liquids, as outlined in the Pressure Equipment Directive 2014/68/EU. - Bosses are drilled, tapped, and plugged for ease of installation. **Pressure/Temperature Rating** - Suitable for PN16 applications with a temperature range of -10 to 85°C. Optimise your piping systems efficiently with reliable Hattersley strainers that meet industry standards and provide exceptional filtration capabilities.

**Features and Benefits** - Quarter-turn full-bore isolation valve with integrated M-Profile press-fit connectors for exceptional sealing reliability. - O-Ring features clearly define potential leak paths, allowing for easy identification of unpressed joints. - Visual press indicators surrounding the pressing contours enable quick identification of successfully pressed joints. - Compatible with hard and half-hard tubes to EN 1057, as well as precision carbon steel tubes to EN 10305-3 and precision stainless steel tubes to EN 10312, catering to a diverse range of application needs. - Installation is swift and straightforward with a Press-Fit tool, significantly reducing site labour time by 20% to 25%. - Offered in various operator types to accommodate specific application requirements. - WRAS approved for use with wholesome (potable) water applications at temperatures up to 85°C. **Specification** - The valve features a DZR Brass (CW 602N) bodied end-entry construction, providing a full-bore, quarter-turn, bi-directional flow. It can be operated via lever, extension lever, lockshield, or T-handle. - The DZR brass ball is chrome plated for sizes from 15mm to 18mm, while sizes from 22mm to 54mm come with a stainless steel ball. It includes PTFE seats and a blowout-proof stem. - Integrated M-Profile Press-Fit ends incorporate a visual pressed indicator and ‘fail-safe’ O-Ring defined leak paths. - The valve is rated PN16, with a maximum temperature tolerance of 120°C and WRAS approved for use at 85°C. **Pressure/Temperature Rating** - Operational range: -10 to 100°C at 25 Barg. - At 110°C, the rating is 23.5 Barg. - WRAS approved for temperatures up to 85°C. This robust isolation valve is ideal for those seeking reliable performance in plumbing and heating applications, ensuring both safety and efficiency with every installation.