Reliance RWC 1500 Litre Aquasystem Potable Expansion Vessel Pre Set 4 Bar - XVES050180

The CONCOA 425 Series four-port, stainless steel barstock regulator provides secondary or point-of-use pressure control for ultra-high purity, corrosive, or toxic gases in high-purity gas distribution systems. Rated to full cylinder pressure for safety, it features a metal-to-metal diaphragm seal, CAPSULE® seats with 360° filtration, pipe-away relief, captured vent bonnet, and front/rear panel mounting. Constructed from 316L stainless steel body, chrome-plated brass bonnet, PTFE seats and seals, 10-micron stainless steel mesh filter, 2 in gauges, Cv 0.1–0.2, 1/4 in FNPT ports, and rated for -40°F to 140°F (-40°C to 60°C). Conforms to CGA G-4.1, ANSI/ASME B40.1, PED 2014/68/EU, and CRN OH5216.

The FSKRDS Sanitary Rupture Discs are a compression-loaded disc or reverse-acting disc, scored around the circumference. This disc has been designed to meet the high quality standards required by 3-A SSI, whose aim is to ensure public health through hygiene equipment. The FSKRDS model is particularly suitable for the Pharmaceutical, Food, and Biotechnology industries and represents the state-of-the-art for these sectors. This disc is entirely made of AISI 316L stainless steel (or other alloys upon request of the client). It’s smooth surface makes it particularly suitable for C.I.P. and S.I.P. treatments to maintain aseptic conditions. PTFE gaskets, which are certified in compliance with FDA and USP class VI, 3-A, and Eu 10/2011 regulations, facilitate the installation in Clamp fittings (sanitary, Tri-Clamp, Tank Connection). The operating pressure modifies the camber of the convex disc only when reverse pressure is reached. Upon reversal, the disc opens completely in a few milliseconds along the score line, thus preventing fragmentation from forming. The FSKRDS disc, with its innovative design, can be used with liquids only and can resist both vacuum and high pressure. 

Specification

Sizes: 1" (DN25) to 8" (DN200)

Materials: Stainless steel, Alloy 201, Alloy 400, Alloy 600, Alloy C276, Titanium, Tantalum

Rupture Pressure: 0,3 bar g - 10 bar g (depending on material and diameter)

Krl: 

Tolerance: from +/- 5 % to +/- 20%

Temperature: Gaskets in PTFE (max 265°C)

Operating Margin: 90% - Able to reach 95% depending on the service conditions

Fragmentation: No (will not break up on bursting)

Use under valve: Yes

Corrosion Resistance: Very good

Linings: Yes

Container: FSHTC 

Rupture Sensor: Electrical

ATEX EX II 2 GD Certification: Available

PED Certification (CE Stamp): Available

3-A Compliance: Available