Resideo Braukmann BA300 Spares - Pilot Pipe

If you are purchasing a new valve and require a pressure test certificate, please ensure to add this item to your order. Please note that for NABIC valves, a separate certificate is necessary, which is available free of charge.

Features & Benefits

• The double regulating feature enables the valve to function for isolation and can be reopened to its preset position, thereby ensuring the maintenance of the required flow rate.

Specifications

• Y-Pattern globe valve equipped with a characterised throttling disc and flanged ends conforming to BS EN 1092-2 PN16. • The valve opening can be adjusted to control flow at a predetermined rate. • Operation of the valve is facilitated by a hand wheel that includes a position indicator. • An ANSI version is also available (MHA733).

Pressure/Temperature Rating

• 16 bar pressure rating from -10 to 120ºC. • Ratings comply with BS EN 1092-2 PN16 standards.

Chrome-Plated Brass Barstock, Single Stage Cylinder Regulator for Inert Medical Laboratory Gas Applications

The CONCOA 305 Series regulator is designed for medical laboratory use. It provides point-of-use pressure control for gases in cylinders with pressures below 500 PSIG (35 BAR), or primary pressure control for inert gas applications that can tolerate minor outlet pressure fluctuations due to cylinder depletion. Like most CONCOA regulators, the 305 Series is rated for maximum inlet pressures of 3000 PSIG (210 BAR) or higher, depending on configuration.

The regulator can include a standard 2–15 LPM flow gauge calibrated for carbon dioxide, or a custom 2–15 LPM calibration for any non-corrosive gas or gas mixture. CONCOA uses a thermal mass flowmeter to size the outlet orifice according to the specific gas and desired flow. While the 305 Series features medical-standard inlet and outlet connections, it is not intended for therapeutic use in humans. For applications requiring constant outlet pressure or flow, CONCOA recommends the 315 Series two-stage regulator.

Features

• 316L stainless steel diaphragm prevents inboard diffusion

• CAPSULE® seat design with integral 360° filtration

• Wide pressure delivery range: 0–15 PSIG (0–2 BAR) to 0–500 PSIG (0–35 BAR)

• Optional 2–15 LPM flow gauge calibrated for carbon dioxide or a user-specified gas

• Low wetted surface area reduces purge requirements

Specifications

• Max inlet pressure (bare body): 3000 PSIG (210 BAR)

• Body: Chrome-plated brass barstock

• Bonnet: Chrome-plated, die-cast zinc

• Gauges: 2 in (50 mm) diameter plated case

• Seat: PTFE

• Filter: 10-micron sintered bronze

• Temperature range: -40°F to 140°F (-40°C to 60°C)

• Diaphragm: 316L stainless steel

• Cv: 0.1

• Helium leak integrity: 1×10⁻⁸ scc/sec

• Internal seals: PTFE

• Ports (bare body): 1/4 in FNPT

• Conformances: CGA G-4.1; PED 2014/68/EU; ANSI/ASME B40.1; CRN OH5216