Steel & Aluminum Pipe Boxing
Where there is need for a more robust enclosure system, Jtech Services offers their profiles in both Steel or Aluminium.
One of the advantages to this type of profile is the range of shapes that can be achieved to accommodate different site applications and requirements. This allows Jtech Services to be able to offer rounded, angled or sloping nose sections, as well as practically and height or depth that may be required.
As with the Pre-Formed Plywood option, there is a full range of accessories available for the Steel and Aluminium profiles. During the pre-manufacture site measure, some of these accessories can be assessed and then installed onto the appropriate profile lengths before powder coating so that a factory finish is also the finish you get on site.
View Product on Company Website
One of the advantages to this type of profile is the range of shapes that can be achieved to accommodate different site applications and requirements. This allows Jtech Services to be able to offer rounded, angled or sloping nose sections, as well as practically and height or depth that may be required.
As with the Pre-Formed Plywood option, there is a full range of accessories available for the Steel and Aluminium profiles. During the pre-manufacture site measure, some of these accessories can be assessed and then installed onto the appropriate profile lengths before powder coating so that a factory finish is also the finish you get on site.
Other Products and Services from Jtech Services
LST Radiator Guards
The primary purpose of the LST Radiator Guard is to protect the vulnerable from the hot surface temperatures of the heat emitter. Having been independently tested, the LST Radiator Guard from Jtech Services makes sure that no one will get hurt from brushing up against the radiator and, because of the design, from getting trapped against it.
There are of course many other factors alongside care of the buildings users that concern the premises managers. These include the question of loss of heat if a radiator is enclosed, the ease of maintenance by heating engineers and also the method of access for the regular cleaning schedule.
There are of course many other factors alongside care of the buildings users that concern the premises managers. These include the question of loss of heat if a radiator is enclosed, the ease of maintenance by heating engineers and also the method of access for the regular cleaning schedule.
Fire Rated Column Casings
There are a number of reasons why a client will require a steel column to be clad, to make it look good or to blend it into the background so that it does not stand out, it could be to convey services to other floors, but in this section we are looking at the structural integrity of the steelwork in the case of a fire.
In the case of a fire it is imperative that the support steelwork retains its strength for as long as possible and usually an engineer will ask for 1 or 2 hours protection for this purpose.
There are a number of solutions to this requirement, but each of them require certain information so that the correct calculations can be done to verify that the fire protection will work properly.
In the case of a fire it is imperative that the support steelwork retains its strength for as long as possible and usually an engineer will ask for 1 or 2 hours protection for this purpose.
There are a number of solutions to this requirement, but each of them require certain information so that the correct calculations can be done to verify that the fire protection will work properly.
Internal Column Casings
The internal casings from Jtech Services are mainly used to enclose structural steelwork in a decorative finish to make them blend into the interiors design.
Other reasons for an internal casing though are to hide away the different mechanical and/or electrical services needed to run a modern building and sometimes to provide pathways for ducting air from one floor to another. The materials used for the internal range of casings include steel, aluminium, stainless, pre-formed plywood, GRG and GRP.
Other reasons for an internal casing though are to hide away the different mechanical and/or electrical services needed to run a modern building and sometimes to provide pathways for ducting air from one floor to another. The materials used for the internal range of casings include steel, aluminium, stainless, pre-formed plywood, GRG and GRP.
Jtech Services
Unit 16, Warrens Way, Telford, Shropshire, TF7 5QB, United Kingdom
Jtech Services are suppliers and installers of casing systems. Our safety casing products include column casings, pipe boxing and casing, LST radiator covers and radiator guards. We can also supply a range of designer furniture used in the domestic and commercial market.