Flat Loose Laid Flooring Membrane Newton DampSafe 601 Slimline

Two-part, solvent-free and clear epoxy which is applied to damp and porous surfaces as a pre-primer prior to the application of Newton Epoxy DPM, a vapour barrier and primer for newly placed or damp concrete and screed.

The high-quality, epoxy formulation allows for application onto damp surfaces, whilst the low-viscosity penetrates deep into porous substrates to effectively seal the surface ready for the main primer application.

Newton Epoxy Primer is quick and simple to apply by brush or roller and can be applied over cementitious screeds and concrete just 7 days after placement.

Features and benefits:

• Very damp-tolerable.
• Can be applied to concrete and screed seven days after placement.
• Low viscosity.
• Solvent free.
• Provides an excellent vapour barrier.
• High-bond damp proof membrane (DPM) that provides a barrier to vapour and to prevent osmotic blistering.
• Life expectancy is equal to that of the surface it is applied to.

Suitable substrates:

• Indoor or outdoor floors of correctly formed, compacted and prepared:
• Concrete, at least seven days old;
• Screed, at least seven days old.

Coated metal waterbar system used for sealing kickerless construction joints within retained concrete structures. It features an adhesive, reactive polymer coating on one of its sides which creates a permanent watertight seal that works immediately.

Installation is quick and easy with the waterbar fitted in place to the reinforcement steel with special clips so that after the placement of the concrete, the waterbar is fully embedded within the two adjoining elements, completely blocking the passage of water through the joint.

Because HydroTank 301-EP Metal Waterbar is not fixed to one of the concrete elements as is the case with conventional waterbars, the forming of a kicker is not necessary. Where the walls are formed above a kicker joint, use 315 Polymer Waterbar.

Newton HydroTank 301-EP Metal Waterbar is certified to resist water pressure of up to 5 bar (50m) and is resistant to all types of naturally occurring ground water types.

• Energy-Efficient Performance: Reduces power consumption by approximately 20% compared to competitor pumps, delivering significant energy savings.
• Durable and Eco-Friendly Design: Made from corrosion-resistant stainless steel and food-grade paraffin oil, ensuring long-lasting performance and environmental responsibility.
• Compact and Versatile: Lightweight and easy to handle, available in both automatic and manual versions with reliable vertical float switches for consistent operation.

Featuring an energy-saving design that reduces power consumption by approximately 20%, in comparison with competitor pumps of equivalent output class, Newton NP eco Pumps are made from stainless steel and resins that are specifically designed for each of the pump components.

The pumps are compact, lightweight, easy to handle and exhibit excellent durability and corrosion resistance. The use of food-grade paraffin for lubricating oil also enhances the pumps eco-friendly credentials.

Capable of continuous duty for many years, Newton NP eco Pumps are available with two motor sizes, 0.4kW and 0.75 kW and are available in both automatic and manual versions, with the automatic pumps featuring ubiquitous vertical float switch, fitted to Newton NP automatic pumps since 2003.