Industrial Fan Accessories
To complement our fans we offer a comprehensive range of accessories including:-
Silencers
Inlet flanges
Inlet flexible connections
Discharge flanges
Discharge flexible connections
Anti vibration mounts
Inlet guide vanes
Dampers
Inlet filter boxes
Bell mouth inlets
Inlet and discharge guards
Our factory fitted options include the following
Inspection doors
Casing drain
Vibration control sensors
Speed control sensors
Temperature sensors
Pressure measurement tappings
Insulated case (50mm Rockwool) for thermal protection and/or noise supression
Shaft seals (graphite seal, Labyrinth seal, stuffing boxes grade 0 and grade 3)
Wearproof construction (special materials)
View Product on Company Website
Silencers
Inlet flanges
Inlet flexible connections
Discharge flanges
Discharge flexible connections
Anti vibration mounts
Inlet guide vanes
Dampers
Inlet filter boxes
Bell mouth inlets
Inlet and discharge guards
Our factory fitted options include the following
Inspection doors
Casing drain
Vibration control sensors
Speed control sensors
Temperature sensors
Pressure measurement tappings
Insulated case (50mm Rockwool) for thermal protection and/or noise supression
Shaft seals (graphite seal, Labyrinth seal, stuffing boxes grade 0 and grade 3)
Wearproof construction (special materials)
Other Products and Services from Ferrari Fan Technology UK Ltd
Direct Driven Centrifugal Fans
All of our centrifugal fans are produced in carbon steel which is protected from corrosion by painting for cataphoresis with two-component polyurethane enamel RAL 7045.
The standard arrangements for direct coupled fans are:
• Arrangement 4: Direct coupling. The impeller is connected directly on the shaft of the B3 mounted motor that is supported by the pedestal. Maximum air temperature 100°C. With cooling fan up to 220°C.
• Arrangement 5: Direct coupling. The impeller set directly on the shaft of the B5 mounted motor supported by a disc fixed on the side of the case.
• Arrangement 8: Joint coupling. The fan has a support and motor mounted on a chair outside the air circuit. Maximum air temperature 100°C. With cooling fan up to 300°C.
The standard arrangements for direct coupled fans are:
• Arrangement 4: Direct coupling. The impeller is connected directly on the shaft of the B3 mounted motor that is supported by the pedestal. Maximum air temperature 100°C. With cooling fan up to 220°C.
• Arrangement 5: Direct coupling. The impeller set directly on the shaft of the B5 mounted motor supported by a disc fixed on the side of the case.
• Arrangement 8: Joint coupling. The fan has a support and motor mounted on a chair outside the air circuit. Maximum air temperature 100°C. With cooling fan up to 300°C.
Plastic Fans
These are our centrifugal impeller corrosion-resistant fans made of synthetic materials. They are particularly useful for projects that require ATEX classifications or in applications that use very corrosive liquids.
Our range of plastic fans are available with EC motors and come in direct or belt driven for a range of different applications.
The fans range from as small as 100mm in diameter to up to 1,000mm in diameter, with a wide range of accessories and specific features such as an insulated case.
Our range of plastic fans are available with EC motors and come in direct or belt driven for a range of different applications.
The fans range from as small as 100mm in diameter to up to 1,000mm in diameter, with a wide range of accessories and specific features such as an insulated case.
F400 ATEX Fan
Ferrari Fan Technology are pleased to announce the launch our new ATEX rated F400 fire fan.
This new product is available in limited sizes of our direct driven centrifugal FQ range, handing options are LG0 and RD0.
Each fan will be smoke rated at F400 which has been tested at 400 degC for 120mins, also the fan will be certified ATEX IIB 3G T3 for hazardous gases.
The smoke rated certification meets the EN12101-3 for F400 and can be used for dual purpose of air ventilation and smoke extract in the event of a fire to provide safe evacuation.
Fans will be supplied with an ATEX motor and will be suitable for Zone 2 Gases, which covers where an explosive atmosphere is not likely to occur but if it does will persist for a short period.
These fans are ideal for pharmaceutical or chemical industries, they will allow safe working environment from hazardous gases and allow safe evacuation in the event of a fire.
We are also offering a range of fan factory fitted features and accessories.
This new product is available in limited sizes of our direct driven centrifugal FQ range, handing options are LG0 and RD0.
Each fan will be smoke rated at F400 which has been tested at 400 degC for 120mins, also the fan will be certified ATEX IIB 3G T3 for hazardous gases.
The smoke rated certification meets the EN12101-3 for F400 and can be used for dual purpose of air ventilation and smoke extract in the event of a fire to provide safe evacuation.
Fans will be supplied with an ATEX motor and will be suitable for Zone 2 Gases, which covers where an explosive atmosphere is not likely to occur but if it does will persist for a short period.
These fans are ideal for pharmaceutical or chemical industries, they will allow safe working environment from hazardous gases and allow safe evacuation in the event of a fire.
We are also offering a range of fan factory fitted features and accessories.
Ferrari Fan Technology UK Ltd
PO Box 265, Herne Bay, Kent, CT6 9AZ, United Kingdom
Ferrari Fan Technology UK Ltd based in Herne Bay, are Air movement and ventilation specialists supplying a vast choice of fans to a wide range of industries including Recycling, Pharmaceutical, Paper, Glass and power distribution. We manufacture axial, centrifugal high pressure, medium pressure and low pressure fans. Fans are available in belt drive or direct drive arrangements, we specialise in products for harsh environments with ATEX certification and Smoke extract certification.