Fibre Splicing
EDP Distribution supply fibre splicing and cleaving solutions from Fujikura.
Part of the installation process of a fibre network, it often requires the splicing of fibre cables together whether it be installing incoming fibres to pigtails in fibre trays, repairing damaged sections of cabling or extending existing cable runs.
When it comes to splicing the splice needs to be of the highest quality to minimise loss that could affect the performance of network. Fujikura is a leading manufacturer of splicing and cleaving equipment that produces the high-quality splices required for modern fibre networks. Their products offer features that not only produce the high-quality results needed but allow them to be produced in a time efficient manner. This is achieved with equipment that communicates with each other, handles fibre better and speeds up the entire splicing process.
View Product on Company Website
Part of the installation process of a fibre network, it often requires the splicing of fibre cables together whether it be installing incoming fibres to pigtails in fibre trays, repairing damaged sections of cabling or extending existing cable runs.
When it comes to splicing the splice needs to be of the highest quality to minimise loss that could affect the performance of network. Fujikura is a leading manufacturer of splicing and cleaving equipment that produces the high-quality splices required for modern fibre networks. Their products offer features that not only produce the high-quality results needed but allow them to be produced in a time efficient manner. This is achieved with equipment that communicates with each other, handles fibre better and speeds up the entire splicing process.
Other Products and Services from EDP Europe Limited
Structural Ceilings
EDP Data Centre Solutions supplies and installs the structural ceiling from Bergvik − Iso Flex-Grid.
Bergvik Iso Flex-Grid is an engineered, dual purpose structural ceiling system that combines a dropped air ceiling plenum, with a structural support grid. Once installed, a continuous M10 threaded interface along the entire ceiling enables infrastructure to attach directly to the ceiling. This provides greater flexibility allowing countless overhead suspension points in all directions. It provides a cost-effective solution as due to the system’s high load-bearing capacity, there is no need to add additional suspension points.
As standard Iso Flex-Grid is designed for point loads up to 300Kg.
Bergvik Iso Flex-Grid is an engineered, dual purpose structural ceiling system that combines a dropped air ceiling plenum, with a structural support grid. Once installed, a continuous M10 threaded interface along the entire ceiling enables infrastructure to attach directly to the ceiling. This provides greater flexibility allowing countless overhead suspension points in all directions. It provides a cost-effective solution as due to the system’s high load-bearing capacity, there is no need to add additional suspension points.
As standard Iso Flex-Grid is designed for point loads up to 300Kg.
Raised Access Floors
EDP Data Centre Solutions supplies and installs the dynamic raised access floor system from Bergvik − Iso Floor.
Unlike traditional pedestal raised floors, Bergvik Iso Floor uses a steel sub-structure that is self-supporting and totally independent from the floor panels. As the floor panels are not required to provide the lateral stability Iso Floor uses up to 70% fewer pedestals which provides greater access to plenum infrastructure as there is less obstruction, this allows space for cable management and improve airflow.
The design of Iso Floor also allows the use of different sized floor tiles from the standard 600x600 tiles. This enables the space to be optimised, by doing so it is possible to achieve up to 25% more equipment within the same space when compared to a traditional floor.
The steel sub-structure also removes the need for expensive equipment stands and heavy equipment can be placed on the frame simply by adding additional beams and pedestals to match the weight load. The entire floor can also be grounded via just two grounding points.
Unlike traditional pedestal raised floors, Bergvik Iso Floor uses a steel sub-structure that is self-supporting and totally independent from the floor panels. As the floor panels are not required to provide the lateral stability Iso Floor uses up to 70% fewer pedestals which provides greater access to plenum infrastructure as there is less obstruction, this allows space for cable management and improve airflow.
The design of Iso Floor also allows the use of different sized floor tiles from the standard 600x600 tiles. This enables the space to be optimised, by doing so it is possible to achieve up to 25% more equipment within the same space when compared to a traditional floor.
The steel sub-structure also removes the need for expensive equipment stands and heavy equipment can be placed on the frame simply by adding additional beams and pedestals to match the weight load. The entire floor can also be grounded via just two grounding points.
Fire Stopping
Fire stopping is an important part of providing structural fire protection and fire safety within a facility. Fire stopping is vital to contain or slow the spread of fires by utilising fire-resistant walls, floor and doors, all of which need to comply with the associated regulations.
Due to the need in Data Centres and Enterprise IT environments to penetrate fire-rated walls and floors to distribute services and connectivity, it is vital that these openings are sealed to reduce the risk of fires or smoke from spreading.
EDP Data Centre Solutions provides a range of fire stopping services that are conducted by Critical Facilities Solutions, part of the EDP Group. These services include: inspecting, reporting and signing off fire stopping, installation of fire-retardant cable transits, linear gap seals, fire batts and collars and pipe wraps.
Due to the need in Data Centres and Enterprise IT environments to penetrate fire-rated walls and floors to distribute services and connectivity, it is vital that these openings are sealed to reduce the risk of fires or smoke from spreading.
EDP Data Centre Solutions provides a range of fire stopping services that are conducted by Critical Facilities Solutions, part of the EDP Group. These services include: inspecting, reporting and signing off fire stopping, installation of fire-retardant cable transits, linear gap seals, fire batts and collars and pipe wraps.
EDP Europe Limited
Unit 4, Europa Park, Croft Way, Witham, Essex, CM8 2FN, United Kingdom
Founded in 1990, EDP Europe has delivered high-quality, innovative products and technologies to the UK and European IT industry for over 35 years. From conception to design & build to ongoing operations, our solutions boost performance and efficiency in clients’ Data Centres and Enterprise IT environments. Using our experience, we deliver high-quality solutions for use across the entire life-cycle of our clients’ critical IT infrastructure.