Resbuild MMA Colour Coat
Coloured protective coating and sealer
As an abrasion and chemical resistant floor coating. As a tough, decorative finish coat for Resbuild MMA Smoothscreed.
Resbuild MMA Colour Coat is a two pack, fast curing coating designed to provide a dust-free, seamless floor finish with protective and decorative properties. The inherent slip resistance of the coating may be enhanced by the incorporation of a suitable anti-slip dressing aggregate. Resbuild MMA Colour Coat allows a fast return to service.
Advantages
- Tough and abrasion resistant
- Colour Stable
- Very good chemical resistance
- Rapid curing minimises down times
- Suitable in wet areas
- Hygienic and easily cleaned
- Cures at low temperatures
- Hot water and fat resistant to 80°C
View Product on Company Website
As an abrasion and chemical resistant floor coating. As a tough, decorative finish coat for Resbuild MMA Smoothscreed.
Resbuild MMA Colour Coat is a two pack, fast curing coating designed to provide a dust-free, seamless floor finish with protective and decorative properties. The inherent slip resistance of the coating may be enhanced by the incorporation of a suitable anti-slip dressing aggregate. Resbuild MMA Colour Coat allows a fast return to service.
Advantages
- Tough and abrasion resistant
- Colour Stable
- Very good chemical resistance
- Rapid curing minimises down times
- Suitable in wet areas
- Hygienic and easily cleaned
- Cures at low temperatures
- Hot water and fat resistant to 80°C
Other Products and Services from Resin Building Products Ltd
Resbuild Floorseal
Ultra-low viscosity solvent based Epoxy sealer
As a sealer and surface hardener for cementitious systems in factories, garages, engineering workshops, abattoirs, dairies, etc., and on external slabs subjected to weathering and heavy traffic.
Resbuild Floorseal is a two pack, solvented Epoxy resin, which penetrates into the pore structure of concrete or masonry to leave a sealed, surface-hardened, dust proof finish with greatly increased chemical resistance. The material is easy to mix and apply, and is supplied in a convenient 1:1 volume mix ratio.
Resbuild Floorseal cures in a two stage operation:
• physical drying i.e. evaporation of the solvent, followed by,
• a chemical reaction between the active ingredients of the Base and Curing Agent components
Advantages
- Penetrates deeply (typically 6-9mm)
- Dust-proofs and surface hardens floors
- Seals against ingress of water, chemicals, etc
- Enhances abrasion resistance
- 1:1 Volume mix
- Long pot life
- Fast Drying
- Taint free after application
- Provides easy to clean surfaces
- Suitable for external application
As a sealer and surface hardener for cementitious systems in factories, garages, engineering workshops, abattoirs, dairies, etc., and on external slabs subjected to weathering and heavy traffic.
Resbuild Floorseal is a two pack, solvented Epoxy resin, which penetrates into the pore structure of concrete or masonry to leave a sealed, surface-hardened, dust proof finish with greatly increased chemical resistance. The material is easy to mix and apply, and is supplied in a convenient 1:1 volume mix ratio.
Resbuild Floorseal cures in a two stage operation:
• physical drying i.e. evaporation of the solvent, followed by,
• a chemical reaction between the active ingredients of the Base and Curing Agent components
Advantages
- Penetrates deeply (typically 6-9mm)
- Dust-proofs and surface hardens floors
- Seals against ingress of water, chemicals, etc
- Enhances abrasion resistance
- 1:1 Volume mix
- Long pot life
- Fast Drying
- Taint free after application
- Provides easy to clean surfaces
- Suitable for external application
Resbuild DPM
Surface applied DPM and damp tolerant primer
As a surface damp-proof membrane. As a moisture suppressant on concrete and sand/cement screeds. As a damp tolerant primer for concrete and resin screeds. As a surface tolerant coating.
Resbuild DPM is a two pack Epoxy resin-based primer/coating, which has been developed to function as a residual construction moisture suppressant, allowing the early installation of moisture sensitive flooring in fast track building programmes. One or two coats may be applied depending on the degree of dampness present in the sub-floor. The product is available in grey, red, and clear colours to allow control of uniform coverage. Resbuild DPM is also suitable for priming damp, minimally prepared substrates.
Advantages
- Provides surface damp-proof membrane
- Allows rapid laying of floor toppings to power floated concrete
- Solvent free, low odour
- Coloured to monitor progress
- Low viscosity, easily applied
- Excellent adhesion
- Surface tolerant
- Excellent resistance to water, grease and oil
As a surface damp-proof membrane. As a moisture suppressant on concrete and sand/cement screeds. As a damp tolerant primer for concrete and resin screeds. As a surface tolerant coating.
Resbuild DPM is a two pack Epoxy resin-based primer/coating, which has been developed to function as a residual construction moisture suppressant, allowing the early installation of moisture sensitive flooring in fast track building programmes. One or two coats may be applied depending on the degree of dampness present in the sub-floor. The product is available in grey, red, and clear colours to allow control of uniform coverage. Resbuild DPM is also suitable for priming damp, minimally prepared substrates.
Advantages
- Provides surface damp-proof membrane
- Allows rapid laying of floor toppings to power floated concrete
- Solvent free, low odour
- Coloured to monitor progress
- Low viscosity, easily applied
- Excellent adhesion
- Surface tolerant
- Excellent resistance to water, grease and oil
Resbuild Epoxy Concrete
Deep section Epoxy mortar
As a deep section protective screed for floor areas subject to impact, abrasion and chemical spillage. As an economical, fast curing in-fill screed/mortar prior to the application of the final floor finish. As a thick section Epoxy bedding mortar for kerbs, etc.
Resbuild Epoxy concrete is a versatile, trowel applied, three component Epoxy resin-based, deep section screed/mortar. The product is supplied in a ‘natural’ or concrete grey colour, and may be sealed or topped with any of the range of Resbuild Epoxy coatings or sealers as required.
Advantages
- Ease of application
- Fast curing characteristics
- Economical
- Hard wearing and durable
- Taint free
- Frost resistant and impervious to water
- Negligible shrinkage even in thick section
As a deep section protective screed for floor areas subject to impact, abrasion and chemical spillage. As an economical, fast curing in-fill screed/mortar prior to the application of the final floor finish. As a thick section Epoxy bedding mortar for kerbs, etc.
Resbuild Epoxy concrete is a versatile, trowel applied, three component Epoxy resin-based, deep section screed/mortar. The product is supplied in a ‘natural’ or concrete grey colour, and may be sealed or topped with any of the range of Resbuild Epoxy coatings or sealers as required.
Advantages
- Ease of application
- Fast curing characteristics
- Economical
- Hard wearing and durable
- Taint free
- Frost resistant and impervious to water
- Negligible shrinkage even in thick section
Resin Building Products Ltd
Resbuild House, Unit 4, Durham Lane, Armthorpe, Doncaster, South Yorkshire, DN3 3FE, United Kingdom
Resin Building Products Ltd (Resbuild), based in Doncaster, South Yorkshire are specialists in resin based building products such as epoxy flooring, floor paint, resin screeds and anti-slip coatings. We also offer unrivalled customer support and advice to help you correctly specify the product you require for your project.