Rhodes Series 400 Sight Glass - UK Manufactured

The Kunkle Bailey 707EL Safety Relief Valve, featuring a Female x Female connection, boasts a superior top guided design that integrates an unobstructed seat bore alongside high lift capability. This valve conforms to the BS EN 4126 Part 1 (BS6759 pt 1:2:3) standard and is designed for use with air/gas, steam/hot water (above 212°F / 100°C), and various process liquids, depending on the specific model selected. We will customise and test the valve according to your requirements, providing a pressure test certificate to confirm the specifications before dispatch.

Specification

Sizes: 1/2" to 2" Connections: BSP Female Inlet x BSP Female Outlet Materials: Bronze body, Chrome Alloy spring Disc: EPDM Medium: Air, Gases, Liquids Set Pressure: 0.35 to 24 Barg Temperature: -20 to +95 °C Notes: WRAS approved when equipped with an EPDM disc. This valve is also commonly referred to as IMI Bailey Birkett valves, Kunkle Emerson valves, and Safety Systems UK valves.

The FSHRPDH Rupture Disc Holder for reverse-acting discs is expertly crafted to guarantee optimal reliability for rupture discs. Designed for easy installation, even in situations where pipe access is horizontal, these holders allow for straightforward verification of proper installation. Upon request, our rupture disc holders can be tested in our laboratories and supplied pre-assembled with compatible rupture discs, ensuring they are ready for direct insertion into your plant.

**Specification**

**Compatible Discs:** FSSCR, FSY90, FSKRD

**Sizes Available:** 1" (DN25) to 40" (DN1000)

**Materials:** Carbon steel, Stainless steel (316L), Alloy 201, Alloy 400, Alloy 600, Alloy C276, Titanium, Tantalum

**Linings:** Yes (PTFE or glass fibre reinforced PTFE)

**Accessories Available:** Nipples, T connectors, excess flow valve, pressure gauge.

**Important Note:** The holders for reverse-acting discs may be larger to ensure adequate protection for the dome of the disc. Download our Rupture Disc Request Form, fill it out, and send it to sales@flowstar.co.uk.

The Medenus SL10 Gas Safety Valve, featuring a spring-loaded design, is expertly engineered to mitigate short-term pressure surges in gas consumption systems. It effectively prevents unacceptably high pressure increases due to gas leaks, safeguarding downstream components from excessive pressure levels. This safety relief valve consists of an actuator housing and a functional unit known as the “control device.” In its closed position, gas flows into the actuator housing as indicated by the directional arrow. The internal measurement line port directs the outlet pressure to be regulated to the base of the main diaphragm within the safety relief valve. This system compares the actual pressure with the target value predetermined by the set point spring. The desired set point can be adjusted using the setting screw. When the pressure exceeds the set point, the measuring unit raises the actuator, allowing excess gas to escape through the blow-off line. Conversely, if the pressure drops below the set point, the measuring unit automatically closes the actuator.

Specifications

Sizes: 1", 1.1/2" & 2"
Connections: Female BSP Inlet x Female BSP Outlet
Medium: Gas
Set Pressure: 3.5 Barg (Max)
Temperature Range: -20 to +60 °C

Upgrade your gas safety systems with the Medenus SL10 Gas Safety Valve for optimal performance and reliability.