Hydraulic Turbine Flow Meter

### Features & Benefits - **One-Way Flow Control**: Our check valves allow flow in a single direction and automatically close if the flow reverses, ensuring reliable operation based on pressure and flow velocity. - **Non-Slam Design**: The innovative rubber seat combined with a spring-assisted closure mechanism minimises slamming, enhancing the longevity of the valve. - **Quiet Operation**: The EPDM rubber seat ensures quiet functionality while improving the seating of the disk, resulting in smoother operation. - **Eyebolt Compatibility**: For sizes DN200 and above, the valves feature tapped holes for eyebolts in compliance with BS EN ISO 3226: 2010 (eyebolts are not included). - **Versatile Applications**: This valve is specifically designed for pump duty applications, making it an ideal choice for various systems. ### Specification - **Dimensions**: The face-to-face dimensions meet the standards outlined in BS EN 558 series 16. - **Installation Flexibility**: Suitable for installation in both vertical and horizontal pipelines. Note that when installed in vertical pipelines, the flow must always be directed upwards. - **Regulatory Compliance**: This valve is meant for use with group 2 liquids only, as defined by the Pressure Equipment Directive 2014/68/EU. ### Pressure/Temperature Rating - **Figure 861**: Rated for PN16 - **Temperature Range**: Operational from -10°C to 120°C Optimise your fluid control systems with our reliable check valves, designed for safety, efficiency, and compliance.

The CONCOA 429 Series four-port stainless steel regulator provides single-stage primary pressure control for ultra-high purity gases or applications requiring face seal connections. Ideal where minor outlet pressure fluctuations are acceptable, it features a metal-to-metal diaphragm seal, CAPSULE® 360° filtration, butt-welded face seals for maximum leak integrity, pipe-away relief, captured vent-capable bonnet, and front/rear panel mounting. Specs: max inlet 3000 PSIG (210 BAR), PTFE seats, 10 µm stainless steel filter, 1/4 in face seal ports, 2 in gauges, Cv 0.1, -40°F to 140°F (-40°C to 60°C). Conforms to CGA G-4.1, ANSI/ASME B40.1, PED 2014/68/EU, CRN OH5216.

The Medenus RS254 Gas Pressure Regulator and Shut Off Valve guarantees a consistent outlet pressure, irrespective of fluctuations in the primary inlet pressure. It efficiently adapts to variable gas consumption, providing rapid pressure regulation during sudden changes in flow rate. The integrated safety shut-off valve ensures secure operation by instantly shutting off the flow in cases of excessively high or low pressure.

The Medenus RS254 Gas Pressure Regulator and Shut Off Valve complies with the DVGW Code of Practice G260/262 and is suitable for all neutral and non-corrosive gases, with additional options available upon request. This versatile regulator is offered with flange connections from DN25 to DN200 and supports working pressures up to 16 bar. All Medenus gas pressure regulators are certified by DVGW and CE, ensuring the highest standards of safety and reliability.

The RS-series regulators boast a variety of options, including safety membranes, vent valves, remote release for the shut-off valve, noise reduction features, and many more. For detailed information, please refer to our documentation or get in touch with our team.

Specification:

• Sizes: 1" (DN25) to 8" (DN200)
• Connections: Flanged PN or ANSI
• Materials:
  • Housing: Silumin Casting
  • Internal Parts: Stainless Steel
  • Disk: NBR (vulcanised)
  • Joints & Seals: Diaphragms: NBR
• Medium: Gas
• Inlet Pressure (Max): 16 Barg
• Outlet Pressure (Max): 3 Barg
• Temperature: -20 to +60 °C
• Notes: Can be installed in any orientation; features a gas-tight zero position