Reliance RWC TPR15 Pressure & Temperature Relief Valve 1/2" x 15mm 6 Bar - PTEM550857

The FSKRDS Sanitary Rupture Discs are a compression-loaded disc or reverse-acting disc, scored around the circumference. This disc has been designed to meet the high quality standards required by 3-A SSI, whose aim is to ensure public health through hygiene equipment. The FSKRDS model is particularly suitable for the Pharmaceutical, Food, and Biotechnology industries and represents the state-of-the-art for these sectors. This disc is entirely made of AISI 316L stainless steel (or other alloys upon request of the client). It’s smooth surface makes it particularly suitable for C.I.P. and S.I.P. treatments to maintain aseptic conditions. PTFE gaskets, which are certified in compliance with FDA and USP class VI, 3-A, and Eu 10/2011 regulations, facilitate the installation in Clamp fittings (sanitary, Tri-Clamp, Tank Connection). The operating pressure modifies the camber of the convex disc only when reverse pressure is reached. Upon reversal, the disc opens completely in a few milliseconds along the score line, thus preventing fragmentation from forming. The FSKRDS disc, with its innovative design, can be used with liquids only and can resist both vacuum and high pressure. 

Specification

Sizes: 1" (DN25) to 8" (DN200)

Materials: Stainless steel, Alloy 201, Alloy 400, Alloy 600, Alloy C276, Titanium, Tantalum

Rupture Pressure: 0,3 bar g - 10 bar g (depending on material and diameter)

Krl: 

Tolerance: from +/- 5 % to +/- 20%

Temperature: Gaskets in PTFE (max 265°C)

Operating Margin: 90% - Able to reach 95% depending on the service conditions

Fragmentation: No (will not break up on bursting)

Use under valve: Yes

Corrosion Resistance: Very good

Linings: Yes

Container: FSHTC 

Rupture Sensor: Electrical

ATEX EX II 2 GD Certification: Available

PED Certification (CE Stamp): Available

3-A Compliance: Available

Features & Benefits

• Horizontal swing mechanism for optimal flow control
• Durable and premium-quality bronze construction
• Metal-to-metal seating ensures reliability
• Check valves facilitate unidirectional flow and automatically close if flow direction reverses.

Specifications

• Bronze Check Valve with metal seating, crafted to BS EN 1982 CC491K standards, featuring a stainless steel 316 hinge pin and a PN20 rating compliant with BS 5154.
• Fig. 44 is taper threaded to BS EN 10226 ISO 7-1 (BS 21), while Fig. 44.AT is ANSI threaded to B1.20.1 (Taper).
• The valve is designed for use with Group 1 & 2 liquids and Group 2 gases, as outlined in the Pressure Equipment Directive 2014/68/EU.

Pressure/Temperature Rating

• BS 5154 PN20 Series B
• 9 Barg at 180°C
• 20 Barg from -10°C to 180°C

Six-port, stainless steel, single-stage regulator for ultra-high pressure applications

The CONCOA 493 Series regulator provides primary pressure control for ultra-high-purity and corrosive gases in applications requiring extreme pressures. Using a robust piston assembly instead of a diaphragm, it safely handles high inlet pressures. Factory-installed options allow it to be configured as line regulation or a single-station manifold, with or without purge, low-pressure alarm, or multiple inlets.

Features:

• Large piston sensor manages pressures up to 6000 PSIG (415 BAR)

• CAPSULE® seat with integral 360° filtration

• Front and rear panel mount for easy installation

• Helium leak integrity verified via spectrometry

Specifications:

• Max inlet pressure: 6000 PSIG (415 BAR)

• Body: 316L stainless steel; Bonnet: 304 stainless steel

• Gauges: 2½ in (63 mm) stainless steel

• Seat: PCTFE (3000 & 4500 PSIG), PEEK (6000 PSIG)

• Filter: 10-micron 316 stainless steel mesh

• Temperature range: -40°F to 140°F (-40°C to 60°C)

• Piston: 316L stainless steel

• Cv: 0.1

• Seals: Encapsulated FKM

• Ports: 1/4 in FNPT

• Conformance: CGA G-4.1; ANSI/ASME B40.1; PED 2014/68/EU; CRN OH5216.5