Berluto DRV225 Reducing Valve
Product Specification
Sizes Available: 1/4" (DN8), 3/8" (DN10), 1/2" (DN15), 3/4" (DN20), 1" (DN25), 1.1/4" (DN32), 1.1/2" (DN40), and 2" (DN50)
Connections: Female BSP Inlet x Female BSP Outlet
Materials: Gunmetal Body / Bonnet (Brass up to DN25; Cast Iron from DN32 onwards) Disk: Regulating Piston made from Brass Joints & Seals: NBR Seals
Medium Compatibility: Suitable for gases and liquids, including drinking water, neutral non-viscous fluids, compressed air, nitrogen, and non-combustible gases. Please note that this product is not suitable for steam.
Inlet Pressure (Max): 40 Barg Outlet Pressure Range: 1.5 to 20 Barg Cv Range: Please refer to our technical data.
Temperature Rating: Maximum of 100°C
Approvals: Compliance with PED 97/23/CE category I
Additional Notes: Achieves the highest reduction ratio of 6:1. For assistance with sizing, please visit the sizing calculator located in the TECHNICAL INFO section on the menu bar above.
This product offers exceptional quality and reliability for a range of applications. Ensure optimal performance and safety by choosing our expertly crafted products.Other Products and Services from Flowstar (UK) Ltd
Hattersley Fig 669 PN32 Gate Valve
Features & Benefits: High-quality bronze body with integral seating surfaces, inside screw pattern with rising stem, suitable for pressures up to 32 bar.
Specification: BS EN 12288:2010, rising stem, FOCS 4PMV union bonnet, one-piece wedge, taper threaded BS EN 10226 (ISO 7-1), sizes ≥ 1/2" available with NPT thread (669AT).
Pressure/Temperature Rating: BS EN 12288 PN32 Series B, 14 bar at 260ºC, 32 bar from -10 to 120ºC.
AURA EXT High Temperature Single Stage Pressure Reducing Regulator
FSGGAG - Graphite Rupture Discs
The FSGGAG Graphite Rupture Discs are designed to be mounted on a stainless steel ring, enabling straightforward installation between flanges. This highly versatile rupture disc combines the mechanical strength of a steel holder with the exceptional properties of high-purity graphite. The graphite material is resistant to aggressive fluids and exhibits low sensitivity to temperature fluctuations in terms of bursting pressure. The disc offers a complete opening with fragmentation upon failure. It is recommended to use vacuum support for rupture pressures below 1.7 barg, while the discs are self-supporting at higher calibration settings.
Specifications
- Sizes: 1" (DN25) to 12" (DN300)
- Materials: Graphite and Stainless Steel
- Rupture Pressure: 0.017 – 15 bar g (varies by diameter)
- Tolerance: +/- 5 % to +/- 20%
- Temperature Range: -60 °C to 300 °C
- Operating Margin: Up to 75%
- Vacuum Support: Not Available
- Fragmentation: Yes
- Usage Under Valve: No
- Corrosion Resistance: Excellent - can be enhanced with a PTFE membrane
- Linings: None
- Container: Included, mounted between flanges
- Seals: Available in graphite
- Rupture Sensor: Electrical
- PED Certification (CE Mark): Available
To request further information, please download our Rupture Disc Request Form and send the completed document to sales@flowstar.co.uk.
Flowstar (UK) Ltd
Wiltshire Road, Kingston-upon-Hull, East Riding of Yorkshire, HU4 6PA, United Kingdom
Flowstar (UK) Ltd is a leading global supplier of safety, relief, and reducing valves. With strong partnerships across major manufacturers, we deliver precise, reliable valve solutions tailored to your needs. Email enquiries to sales@flowstar.co.uk or call us on +44 (0)1482 601030.