Niezgodka Type 69 Open Discharge Safety Valve

The Broady C4 Fig 3 High Pressure Reducing Valve is a self-acting high pressure reducing and regulating valve, designed for robust performance and available in sizes ranging from 6NB to 100NB. This valve can accommodate a maximum inlet pressure of 345 Barg, while offering a reduced pressure range of 1.00 to 70.00 Barg. It is ideally suited for a variety of applications involving steam, air, gas, and liquids.

Specifications:

• Sizes: 6NB to 100NB
• Connections: Various options available
• Materials: Bronze, Carbon Steel, Stainless Steel
• Disk: Piston: Stainless Steel
• Joints & Seals: Seals: PTFE, O-Rings: Nitrile
• Medium: Compressed Air, Gases, Water, and Oil
• Maximum Inlet Pressure: Bronze = 138 Barg
• Outlet Pressure Range: 7 to 70 Barg
• Cv Range: Please inquire for details
• Temperature: To be specified based on application
• Approvals: Meets industry standards
• Notes: Additional information available upon request

This high pressure reducing valve is perfect for industries requiring reliable pressure regulation in demanding environments. Enhance operational efficiency with the Broady C4 Fig 3 – your trusted solution for high pressure reduction.

Chrome-Plated Brass Barstock, Single Stage Cylinder Regulator for Inert Medical Laboratory Gas Applications

The CONCOA 305 Series regulator is designed for medical laboratory use. It provides point-of-use pressure control for gases in cylinders with pressures below 500 PSIG (35 BAR), or primary pressure control for inert gas applications that can tolerate minor outlet pressure fluctuations due to cylinder depletion. Like most CONCOA regulators, the 305 Series is rated for maximum inlet pressures of 3000 PSIG (210 BAR) or higher, depending on configuration.

The regulator can include a standard 2–15 LPM flow gauge calibrated for carbon dioxide, or a custom 2–15 LPM calibration for any non-corrosive gas or gas mixture. CONCOA uses a thermal mass flowmeter to size the outlet orifice according to the specific gas and desired flow. While the 305 Series features medical-standard inlet and outlet connections, it is not intended for therapeutic use in humans. For applications requiring constant outlet pressure or flow, CONCOA recommends the 315 Series two-stage regulator.

Features

• 316L stainless steel diaphragm prevents inboard diffusion

• CAPSULE® seat design with integral 360° filtration

• Wide pressure delivery range: 0–15 PSIG (0–2 BAR) to 0–500 PSIG (0–35 BAR)

• Optional 2–15 LPM flow gauge calibrated for carbon dioxide or a user-specified gas

• Low wetted surface area reduces purge requirements

Specifications

• Max inlet pressure (bare body): 3000 PSIG (210 BAR)

• Body: Chrome-plated brass barstock

• Bonnet: Chrome-plated, die-cast zinc

• Gauges: 2 in (50 mm) diameter plated case

• Seat: PTFE

• Filter: 10-micron sintered bronze

• Temperature range: -40°F to 140°F (-40°C to 60°C)

• Diaphragm: 316L stainless steel

• Cv: 0.1

• Helium leak integrity: 1×10⁻⁸ scc/sec

• Internal seals: PTFE

• Ports (bare body): 1/4 in FNPT

• Conformances: CGA G-4.1; PED 2014/68/EU; ANSI/ASME B40.1; CRN OH5216

Please note that Auld Valves Ltd is no longer in operation. However, do get in touch with us, as we may have alternative options available within our range.

The Auld Surplus valve is a highly accurate, self-operated pressure control valve designed for managing surplus pressure in applications involving steam, water, oil, gas, and more. Our valve features alternative trims that cater to permanent load changes and is available in 14 sizes and 6 material options. Additionally, it offers remote sensing capabilities for a stable response, ensuring optimal performance in various settings.