HydroCoat 1 Screed 2K
Self-levelling waterproof performance: HydroCoat 1 Screed 2K is a cement-based screed enhanced with epoxy and polymers, designed to level and waterproof concrete. Its free-flowing mix can be poured or pumped to create a smooth, durable, lightly textured finish.
Fast-setting and hard-wearing: It cures rapidly to produce a strong, abrasion-resistant surface that can handle foot traffic and allows resin coatings or screeds to be added within 4–24 hours.
Dense and protective: Its cementitious structure offers low water absorption and high wear resistance, delivering dependable waterproofing and long-term durability in demanding indoor settings.
Other Products and Services from Newton Waterproofing
Rubber Waterproofing Membrane Newton HydroBond 109-LM
Radon-certified, flexible, single-component, cold-applied and seamless rubber waterproofing membrane used primarily for the external waterproofing of earth-retaining structures such as basements and foundation walls.
HydroBond 109-LM is extremely puncture resistant with elasticity of 850% and a 95% recovery memory. The membrane becomes fully engaged into the substrate to prevent water tracking and is suitable for all below ground and earth-retained structures, ranging from domestic basements to the largest civil engineering projects.
HydroBond 109-LM is available in two variants: Medium Viscosity, for use in warmer temperatures, and Low Viscosity, for when it is cooler. HydroBond 109-LM is also a constituent product of the Newton HydroBond System supported by BDA Agrement Certificate BAB 16-031/04/A and is accepted by the NHBC as a suitable waterproofing system for Type A Waterproofing to Grades 1a, 1b, 2 & 3 - BS 8102:2022.
Newton HydroTank 315 Waterbar for Sealing Structures Against Water Leaks
A high grade, hydrophilic waterbar with high elasticity and high tensile strength, made from a polymer which swells when in contact with moisture, ideal for sealing structures against water leaks to both cast-in-place concrete and precast construction joints.
The swelling is achieved through hydrophilic acrylate polymers, which are inseparably embedded within the butylene carrier material. This results in high elasticity and exceptional tensile strength, even when fully expanded within the joint.
Due to its high resistance to acids, alkalis and organic solutions, HydroTank 315 Waterbar can be used to seal joints where aggressive water is expected such as within sewage treatment plants, biogas plants and liquid waste holding tanks.
HydroTank 315 Waterbar swells up to 9 times its original size when in contact with water, sealing the joint fully and reliably. The product is particularly suited to sealing non-compressed joints such as at the junction between slab and wall.
Collomix Xo 1
Delivering 1,010 watts of power, the Xo 1 is a compact, lightweight mixer ideal for many applications and volumes up to 40 litres. It can be paired with WK, KR or DLX stirrers, allowing it to suit the mixing requirements of a wide range of Newton products.
Newton Waterproofing
Unit 17-19, Sovereign Way, Tonbridge, Kent, TN9 1RH, United Kingdom
Newton Waterproofing Systems, est 1848, is the UK's leading independent supplier of structural waterproofing systems, including cellar and basement waterproofing, tanking and pumping products, damp proofing, water control and drainage products.