Company details for:
Rix Tools UK Ltd
Vicarage Road,
Sheffield,
South Yorkshire,
S9 3RH,
United Kingdom
Quick Links:
Products / Services
Compact Manual Puncher Straight
loading only takes place in the tension direction and makes work considerably easier.
Smooth hand hydraulic power assisted operation.
Supplied with carry case and inlay, tension bolts three spacer rings and one pre-drill bit.
Compact Manual Puncher Sets
Sets options with cutters types
Monocut : Tricut : Tricut+plus : or Twincut.
Cordless Battery Operated Puncher Flexible Head
For use in construction of switch gear and control cabinets-suitable for all hole puncher types.
Features:
Soft touch handle
USB interface for service intervals and pressure values.
Die protection via pressure sensors for prolonged cutter life.
Compact Manual Puncher Swivel 90°
Swivel head version for access in difficult to reach areas.
90° Angle of head.
Supplied with carry case and inlay, tension bolts three spacer rings and one pre-drill bit.
Compact Combi 90° Puncher Set
Sets options with cutters types Monocut : Tricut : Tricut+plus : or Twincut.
Compact-flex Manual Puncher Flexible
Flexible head version for total flexibility making access to difficult areas possible.
Supplied with carry case and inlay, draw bolt 19.0 mm, draw bolt 19.0 mm X 9.5 mm.
Three spacer rings and one pre-drill bit.
Foot Pump Puncher & Cylinder
Supplied cased as a set including hose, spacer rings and hydraulic cutting head.
AP600-2
and cabinet door up to 2200 mm x 100 mm, and 30 mm margin fold height.
Punching possible right up to fold margins.
Limit stop in X and Y directions
Stable Press body in heavy duty torsion stiff welded body
Dual action hydraulic cylinder
Anti twist piston rod 55.0 Ø
Die bed, fixed force to press body
Rapid tool change
Hold down device with safety function
Length and depth limit stop with smooth bearing operation
Digital measuring indicator for x and Y
Dual circuit hydraulic unit with electric pump ( very low noise )
Safety foot switch
Alfra Press Round Punch
Size range. 3.2 Ø - 63.5 mm.
Alfra Press Round Die
Alfra Press replacement circular die. Size range 3.2 Ø - 63.5 mm...
Alfra Press Square Puncher
and centring point including die.
Size range. 12.7 - 68.0 mm.
Alfra Press Special Punchers
Monocut Punch & Die with Draw Bolt
Size range 12.7 mm Ø up to 120.0 mm Ø
*Maximum material thickness 3.0 mm sheet steel ( S235 ) *dependent on draw bolt used.
Ideal for clean burr free cuts in control panels and similar.
Monocut Hole Puncher Sets
Popular Metric and pipe gas options, also nominal bore .
Tricut
With a size range 12.5 mm up to 63.5 mm Tricut punchers produce Clean burr free holes.
Ideal in the production of control cabinets and other similar processes.
The waste material is split into three pieces for efficient removal once the cut has been made.
In hand use with bearing tension bolts ( sold separately ).
In use with hydraulic tools use appropriate draw bolts.
Tricut+Plus
With 3 Fold Split
With 4 cross-hair markings for simple central alignment
Tricut+Plus Hole Puncher Sets
and stainless steel.
Supplied in practical heavy duty carry cases.Available options include metric,
pipe gas, inch and conduit sizes.
Twincut
With 2 Fold Split With 4 cross-hair markings for simple central alignment Usable up to a material thickness
of 3.0 mm.
Busbar Bending & Hole Punching Device
and length limit stop.
Easily convertible from bending to punching.
Bending.
Bending capacity : 120 x 12 mm copper bar
Bending up to : more than 90°
Smallest leg length : 50 mm
Smallest U Bend : 100 mm
Smallest Z bend : 72 mm ( depending on material thickness )
The above values are based on copper rails at 120 x 10 mm.
LPV Basic Busbar Bending & Punching
BS160 Portable Busbar Device
The angle measurement scale is engraved on the top section,supplied with R=11 mm & R=5 mm dies
bends up to a maximum 160 mm width are possible.
Quick and simple change over from bending to punching.
R=5 mm Die for Bus bar 3-8 mm
R=11 mm Die for Bus bar 9-12 mm
AHP M1 Electro-Hydraulic Pump
These pumps have been developed to deliver the essential
hydraulics needed to efficiently operate their counterpart
devices such as Bus bar benders, punchers & cutters.
Capable of production run requirements these units are virtually
maintenance free and are available in either 240 V or 110 V options.
PSG Duo Din Rail Cutter
For common mounting rails , cuts both profiles TS 35/7.5 + 35/15 mm precisely without effort.
Easy to install on a workbench with scale divisions in metric and inches.
VKS Cable Duct Cutter
Effortlessly cuts up to 125mm wide in seconds precisely without effort.
Fixing tabs for easy fitting to a workbench are attached to the device and to the longitudinal stop.
VKS125 Replacement Blade
About us
The Alfra product range includes all tooling for the construction of switchgear and control panels. Alfra products are made to the highest standards and approvals. Renowned for their unique quality, Alfra products are popular with many customers all over the world.
The Rix Tools UK Ltd product range includes Busbar Bending, Punching & Cutting machines which can bend Busbars up to 160 x 12mm, punch up to 21.5mm holes through a busbar thickness of 12mm and cut through busbars up to 160 x 15mm.
Cutters like the VKS - 125 Cable Trunking Cutter have been built to high standards and will create a very neat cut.
Rix Tools UK Ltd offers a choice of 8 different types of machines in our Busbar section and include electronic and manual options.
In addition, Rix Tools also offer a range of hand punches for steel as well as free standing machines which can accommodate sheet steel panels up to 2200 x 1030mm. The machines are also capable of punching Steel, Stainless Steel, Aluminium and Plastic.
Other tools in the range include:
- The robust Alfra VKS 125 Cable Trunking Cutter
- Din Rail Cutting and Punching
- Wiring Duct Cutters
- Cable Cutters
- Crimping Tools
- Hole Saws
- Step Drills
- Mag Drills
- Deburring and Bevelling machines
- Steel Girder Punching
- Re Bar bending and Re bar cutting
