Resbuild MMA Primer
Standard primer for cementitious surfaces
As a primer for concrete, steel, masonry, and marine plywood.
Resbuild MMA Primer has been developed as a general purpose primer, being used prior to any of the Resbuild MMA range of coatings, mortars, and screeds. The product exhibits outstanding adhesion to concrete, as well as steel, masonry, and marine plywood, and the fast curing characteristics allow rapid application of subsequent coatings, mortars or screeds.
Advantages
- Rapid cure, even at low temperatures
- Very good chemical resistance
- Excellent adhesion
- Impervious to water
- Pre-packed units ready for use
- Easily applied
View Product on Company Website
As a primer for concrete, steel, masonry, and marine plywood.
Resbuild MMA Primer has been developed as a general purpose primer, being used prior to any of the Resbuild MMA range of coatings, mortars, and screeds. The product exhibits outstanding adhesion to concrete, as well as steel, masonry, and marine plywood, and the fast curing characteristics allow rapid application of subsequent coatings, mortars or screeds.
Advantages
- Rapid cure, even at low temperatures
- Very good chemical resistance
- Excellent adhesion
- Impervious to water
- Pre-packed units ready for use
- Easily applied
Other Products and Services from Resin Building Products Ltd
Resbuild Floorpatch
Heavy duty Epoxy mortar
Repairs to spalled or damaged concrete; chemical bunds; bedding pre-cast concrete beams; nosings on expansion joints; floor repairs. General repairs to cementitious substrates where strength and chemical resistant properties are essential.
Resbuild Floorpatch is a high strength , trowel applied, three component Epoxy resin-based mortar designed for rapid and permanent repairs to concrete and masonry surfaces. Resbuild Floorpatch is a blend of epoxy Resin, Polyamine curing agent, graded siliceous aggregates and colour pigments. The mixed material is applied to a suitably prepared and primed surface, and quickly cures to form a durable, abrasion and chemical resistant repair.
Advantages
- Pre-packed units − ready to use
- Fast curing characteristics
- Impact and abrasion resistant
- Frost resistant and impervious to water
- Excellent mechanical properties
- Unaffected by a wide range of acids, and industrial chemicals
- Negligible shrinkage
- High bond strength
- Cures under damp, cool conditions
Repairs to spalled or damaged concrete; chemical bunds; bedding pre-cast concrete beams; nosings on expansion joints; floor repairs. General repairs to cementitious substrates where strength and chemical resistant properties are essential.
Resbuild Floorpatch is a high strength , trowel applied, three component Epoxy resin-based mortar designed for rapid and permanent repairs to concrete and masonry surfaces. Resbuild Floorpatch is a blend of epoxy Resin, Polyamine curing agent, graded siliceous aggregates and colour pigments. The mixed material is applied to a suitably prepared and primed surface, and quickly cures to form a durable, abrasion and chemical resistant repair.
Advantages
- Pre-packed units − ready to use
- Fast curing characteristics
- Impact and abrasion resistant
- Frost resistant and impervious to water
- Excellent mechanical properties
- Unaffected by a wide range of acids, and industrial chemicals
- Negligible shrinkage
- High bond strength
- Cures under damp, cool conditions
Resbuild Floorseal
Ultra-low viscosity solvent based Epoxy sealer
As a sealer and surface hardener for cementitious systems in factories, garages, engineering workshops, abattoirs, dairies, etc., and on external slabs subjected to weathering and heavy traffic.
Resbuild Floorseal is a two pack, solvented Epoxy resin, which penetrates into the pore structure of concrete or masonry to leave a sealed, surface-hardened, dust proof finish with greatly increased chemical resistance. The material is easy to mix and apply, and is supplied in a convenient 1:1 volume mix ratio.
Resbuild Floorseal cures in a two stage operation:
• physical drying i.e. evaporation of the solvent, followed by,
• a chemical reaction between the active ingredients of the Base and Curing Agent components
Advantages
- Penetrates deeply (typically 6-9mm)
- Dust-proofs and surface hardens floors
- Seals against ingress of water, chemicals, etc
- Enhances abrasion resistance
- 1:1 Volume mix
- Long pot life
- Fast Drying
- Taint free after application
- Provides easy to clean surfaces
- Suitable for external application
As a sealer and surface hardener for cementitious systems in factories, garages, engineering workshops, abattoirs, dairies, etc., and on external slabs subjected to weathering and heavy traffic.
Resbuild Floorseal is a two pack, solvented Epoxy resin, which penetrates into the pore structure of concrete or masonry to leave a sealed, surface-hardened, dust proof finish with greatly increased chemical resistance. The material is easy to mix and apply, and is supplied in a convenient 1:1 volume mix ratio.
Resbuild Floorseal cures in a two stage operation:
• physical drying i.e. evaporation of the solvent, followed by,
• a chemical reaction between the active ingredients of the Base and Curing Agent components
Advantages
- Penetrates deeply (typically 6-9mm)
- Dust-proofs and surface hardens floors
- Seals against ingress of water, chemicals, etc
- Enhances abrasion resistance
- 1:1 Volume mix
- Long pot life
- Fast Drying
- Taint free after application
- Provides easy to clean surfaces
- Suitable for external application
Resbuild MMA Smoothscreed
Self smoothing floor screed
As a tough, impervious, chemical resistance floor finish where hygiene and ease of maintenance are important e.g. food and beverage production, hospitals, canteens and kitchens, pharmaceutical plants, laboratories, etc. and in manufacturing industries where a fast return to service and minimal down times are essential.
Resbuild MMA Smoothscreed has been designed to provide a hard wearing, impervious floor finish which is hygienic and easy to clean. Resbuild MMA Smoothscreed with its combination of attractive finish and excellent resistance to a variety of chemicals, is suitable for a wide range of light industrial environments. The product exhibits very fast curing characteristics allowing a full return to service after 2 hours. Resbuild MMA Smoothscreed is typically laid at a thickness of 2-4mm. The aesthetic finish may be augmented by incorporating a decorative flake or coloured Quartz broadcast.
Advantages
- Fast cure and return to service
- Very good chemical resistance
- Hard wearing
- Excellent abrasion resistance
- Hygienic and easily cleaned
- Range of slip resistant finishes possible
- Sound adhesion to concrete and metal substrates
- Easily applied
- Suitable for wet and dry areas
As a tough, impervious, chemical resistance floor finish where hygiene and ease of maintenance are important e.g. food and beverage production, hospitals, canteens and kitchens, pharmaceutical plants, laboratories, etc. and in manufacturing industries where a fast return to service and minimal down times are essential.
Resbuild MMA Smoothscreed has been designed to provide a hard wearing, impervious floor finish which is hygienic and easy to clean. Resbuild MMA Smoothscreed with its combination of attractive finish and excellent resistance to a variety of chemicals, is suitable for a wide range of light industrial environments. The product exhibits very fast curing characteristics allowing a full return to service after 2 hours. Resbuild MMA Smoothscreed is typically laid at a thickness of 2-4mm. The aesthetic finish may be augmented by incorporating a decorative flake or coloured Quartz broadcast.
Advantages
- Fast cure and return to service
- Very good chemical resistance
- Hard wearing
- Excellent abrasion resistance
- Hygienic and easily cleaned
- Range of slip resistant finishes possible
- Sound adhesion to concrete and metal substrates
- Easily applied
- Suitable for wet and dry areas
Resin Building Products Ltd
Resbuild House, Unit 4, Durham Lane, Armthorpe, Doncaster, South Yorkshire, DN3 3FE, United Kingdom
Resin Building Products Ltd (Resbuild), based in Doncaster, South Yorkshire are specialists in resin based building products such as epoxy flooring, floor paint, resin screeds and anti-slip coatings. We also offer unrivalled customer support and advice to help you correctly specify the product you require for your project.