Company details for:

Everyvalve Ltd

Submit press release

(0)

19-19A Station Close,
Industrial Estate,
Potters Bar,
Hertfordshire,
EN6 1TL,
United Kingdom

Quick Links:

Products / Services

Electric 90/180 Degree Turn Actuators

Pneumatic 90 Degree Operation

Suitable for:- 2/3 Way Ball, Butterfly & Plug Valves where remote operation is required. The size of the actuator is important to cover the needs of the valve under the stress that is likely to be encountered in the worst condition of service line pressure to be used and the natural stiffness of opening and closing of a valve, even after prolonged lack of use. It is wise to operate valves regularly. Three way ball bottom entry ball valves require the ball plug machined at right angles so as take advantage of the 90 degree rotation. Bodies are anodised aluminium & are of simple neat design with spares available. Use clean filtered air always and restrictors for controlling speed of operation. Prices of Valve and fixings need to be added to the actuators.

Ball Valves Brass

Ball Valves Brass
Full bore PTFE seated Brass No. Plated body + Chr. ball & F BSP ended 1/4" - 4" 30 to 12 bars. Use with water, air, gas and oil. Steel lever handle for operation PTFE seals. 30 bars to 1.5".

Ball Valve C.S/SS

3 Piece Carbon Steel/SS trim. Full Bore. Anti Static Fire Safe SS316 Body also + Lock Lever. 1/4" to 4" BSP. Std is 50 Bars. (Weld ends- Socket /Butt/Flg) Cast Iron & SS Flgd type also.

Check Valve (Spring) Brass

Spring in-line Brass Valve. Nylon Seated + Nitrile Seal. 3/8" - 4" BSP threaded. Cheap valve to 10 bars. Air & Water. Bronze & SS type also.

Globe Valve Bronze

Bronze medium duty + cast Hand wheel. to 15 bars H2O/steam. Also in SS316. 1/2"-8" C.I. CS & SS types also Flanges on large types.

Pressure Reducing Valve Brass

Pressure Reducing Valve Brass
Type 'A' Brass adjustable 1-6 bars out 1/2"-12" for water.SS316 & Cast Iron types to order Std Ref ITAP

Hose Pour Taps SS / Brass

Brass Ni. body Chr. ball plug. 3/8"-1"(M) PTFE seats. to 10 bar. Red Lever operated + spout. For water & Solvents SS304 Sample types shown above with PTFE seats and of high polished appearance.

Needle Valve Brass

Brass in-line ni. body NBR seal. To 10 bars. 1/4" To 1". For air & water. (Fine Control). SS Types to 400 Bar.

Pressure Gauges

Std 65mm dia Glycerine filled. Bottom 1/4" BSPM entry. 0 - 4/7/10/16 bar. Other ranges & types. Uses:- Air, Oil, Water.

Ball Float Valves Brass

Ball Float Valves Brass
Brass Bodied PP float MBSP inlet + nuts std. 0-10 bar operating. Cast Iron, PP & SS316. Flanged types also to 12".
REF: 17P301 PP
REF: 17M501 C.I

MA3 Electric Barrel and Container Pump

QUANTITY: up to 100 l/min
DELIVERY HEAD: Max 8m wg
VISCOSITY: Max 300C/poise
(mpa.s) approx 40 E
TEMPERATURE: Max 50°C(PP)
100°C (alu, SS, PVDF)
UNIVERSAL MOTOR 400w,
220v, 110v or 42v with switch
MOTOR PROTECTION & 5 meters cable with safety plug
PUMP TUBES available in :
PP, PVDF, SS316 & aluminium
IMMERSION DEPTHS :
700, 900 or 1200 mm Special
lengths possible up to 2.5m
TUBE OUTSIDE : 40mm Dia (PP)
42mm Dia alu 38mm Dia (SS/HC)
WEIGHT: (pump with motor)
approx 3.5Kg (PP) 7.5kg (SS)
PUMP for 220v - VDE + GS

Type 205 PP Hand Drum Pump

HIGH OUTPUT:
Dispenses 250ml each down stroke when fully primed
CHEMICAL RESISTANT:
Suitable for use with liquid media that is compatible with PP & PTFE (Std. construction materials.)
CONVENIENT Weight:
1 Kg Stoke is 435mm.
OUTLET: Will align to any angle or direction + optional 20mm Hose Outlet Tail included
VERSATILE - Telescopic uptake PP pipe adjusts to 25/210 litre containers with BSP & Trisure collar adaptor as standard. Free hand use also very useful. Fits all common plastic/metal drums.
FITTING - Don't over tighten the butterfly collar screw or lose 'O' hose tail outlet.
SIZE - Boxed - 520mm * 180mm * 110mm in strong own carton. each complete.

Terylene PVC Reinforced Low Toxic

Terylene PVC
Reinforced
Low Toxic

Arizona Spiral Delivery Low Toxic

Arizona
Spiral Delivery Low Toxic

TricoFlex PVC Smooth Rein.. (Yellow) PETP

TricoFlex PVC
Smooth Rein..
(Yellow) PETP

Trigger Spray Gun

''EvE'' PP Pour Taps

EPDM Seals & Thread Gasket. This co-Polymer Polypropylene Black Or Orange Version angled pour tap is ideal for OEM equipment in dispensing chemicals or water as necessary. Hose outlet is suitable for hose connection. 1/2" version if 62% of the flow of 3/4" * 20 type. Pressure is recommended for 4 bars or less & max 90 C.SS Fixing screw.

Light Sewerage Pump (Voertex) in SS 304

Application for solids handling to 40mm in sewerage type applications. Not suitable for metal objects/other non stated uses. Max Temp = 50°C Diameter for all = 164mm. Side outlet design

Cetrifugal Pumps in Stainless

Brass & PPO SS Type (304)

All pumps are flooded suction type working on direct coupled basis. Avoid running dry. Dry running protection recommended. IP 45 connection. Class F Insulation. Continuous Service. 50°C max. Carbon Ceramic Mechanical Seal. Spindle in 416 SS. Impellor made in glass reinforced 'Noryl'. Motor AL) externally ventilated closed type. 'DROPS' system. Closed junction box.

Quick Tank Connector Polypropylene (PP) Fittings For Tanks

Quick joints
New time saving concept
For fitting tanks with outlets
In less than half the time

Petrochemical Class Valves

Manual Types Normally Good Stock Availability to 150mm

Sockets Weld / BSP / NPT / Flanged Ends

Metal Bodied Valves

Ball Valve SS

SS 316 Full bore PTFE seats + lever LOCK handle. 1/4" to 2" BSP. To 50 Bars pressure. Two part design. Well suits acids, chemicals & various uses at very economic cost.

Butterfly Valves - Ductile Iron / Stainless Steel / Aluminium

Options & Extras Butterfly Valves
* Size Up to 24"

* Bronze Disk Type
Wafer Type E9925
Tapped & Lugged E9935

* PTFE Lined
Partilally or Full
* Fully Lugged
Details on call PN16/150

Ductile Iron Gate Valves for Water Services - Water Works

Common Uses:

1. Water Treatment Plants: Essential in processes like purification and wastewater management.
2. Agricultural Irrigation: Widely used in irrigation systems for efficient water distribution.
3. Fire Protection Systems: Integral in fire-fighting infrastructure.
4. Industrial Applications: Found in various manufacturing and processing facilities.
5. Drinking Water Systems: Utilised in the supply and treatment of potable water.
6. Hydraulic Engineering: Employed in hydraulic systems and civil engineering projects.

Key Features:

1. Robust Construction: Made from durable metals, these valves are built to withstand harsh conditions.
2. Leak-Proof: Offers a reliable seal, minimizing the risk of leaks.
3. Full Flow Design: When open, they allow for an unobstructed flow of fluids.
4. Dual Directional Flow: Capable of handling fluid flow in both directions.
5. Temperature Resilience: Effective across a broad range of temperatures, generally between -10°C to 90°C.
6. Guided Operation: Ensures the gate moves correctly to form a tight seal.

About us

Everyvalve Ltd situated in Potters Bar, Hertfordshire are an established manufacturer and supplier of Industrial Valves, Pumps, Hose Fittings & Pipe Fittings. Since 1983, we have been serving the Petrochem, Chemical, Engineering, Contracting OEM, Councils and overseas markets etc.

From a large Stock in our factory we supply daily, clients in the UK and have special arrangements for shipping Worldwide. Certification 3.1 is available on technical supplies where appropriate along with all aspects of conformity. Credit card payments available to UK clients.

Our Products Include:

Valves − Solenoid, Sustaining, Actuated (Pneumatic & Electric), Reducing, Knife, Penstock, Needle, Relief, Butterfly, Ball, Check, Globe, Gate, Diaphragm Valves.
Pumps − Centrifugal, Submersible, Drum & Hand type (SS) and plastics materials.
Hose Fittings − SS, Nylon & PP in sizes 3mm to 150mm.
Pipe Fittings − PP, PVC, Plain, Threaded for Industrial use.
range by Everyvalve.
Special constructions considered on a technical basis..

Our valves are supplied in a variety of metals and plastics Industry including − Steel, Stainless Steel, Brass, Cast Iron, PVC, ABS, HDPE, etc. Valves are available in 3mm to 1200mm sizes.

We are Manufacturers but offer Brands:- Siraie, LVF, Products & Nocchi, Brandoni, Mars, Kingdom, Haitima, Econosto, Bonney Forge, Velan, Samson Control, Spears, Hidroten, Praher, Peter Smith, Socla, Honeywell, Pekos, Perar, Plastulon, Starline, AKO Pinch Valve, Ari, Gemu, Bailey Birket, Bermad, Broady, Castflow, Cla-Val, Crane, Saunders, Ebro, ETV, Ghibson, Goetze, Kitz, OMB, Aquamatic, Zavero, BD, Irritec, Tefen, Kraft, Safi,Spears, Nocchi, Pentair, Asahi.Crane, Spirax Sarco, Keystone, Glenfield, Hidroten, Swagelok, ASV,

Durapipe, Ceepex, Eriks, Brandoni, Flowserve, Langley, Fluval, Orbinox, Tomoe and more.