Newton CDM Fibran XPS-500C for Basement Waterproofing Systems
Newton CDM Fibran XPS-500C is a 50mm deep, closed-cell thermal insulation board made from rigid extruded polystyrene foam (XPS).
The product is manufactured in accordance with EN 13164 - "Thermal insulation products for buildings - Factory made products of extruded polystyrene (XPS)- specification."
Produced exclusively for Newton Waterproofing Ltd, CDM Fibran XPS-500C insulation boards are used to form a 50mm spacer adjacent to the CDM BaseDrain and CDM FloorDrain drainage channels within the Newton CDM System cavity drain waterproofing system. The insulation boards are rated at 500 kPa and feature specifically designed slots to the underside of the boards, that in combination with the perimeter and spine drainage channels of the Newton CDM System, form a fully drained supporting spacer below the floor drainage membrane.
The insulation boards can also be used as a protection for Newton liquid applied waterproofing membranes applied externally to new earth retained structures or retained walls, uniquely offering protection, insulation and drainage within one product.
Other Products and Services from Newton Waterproofing
Newton CDM 520 eco Floor - Basement Waterproofing Membrane for Waterproofing of Existing & New Build Basements
BBA certified, 100% recycled 20mm cavity drain membrane for basement floors - with its 20mm stud profile, Newton CDM 520 Eco Floor is generally specified where it is anticipated that there may be a risk of severe water penetration.
Newton 520 eco is one of the main constituent parts of the Newton CDM System, our BBA Certified 'Type C' cavity drain system used for waterproofing earth-retained structures, including drainage channels sited below the membrane for increased drainage capacity.
With its 20mm deep stud profile, CDM 520 eco Floor is used within the CDM System as a high drainage capacity floor membrane and is generally specified where it is anticipated that there may be a risk of severe water penetration.
Flat Loose Laid Flooring Membrane Newton DampSafe 601 Slimline
Flat Loose Laid High Grade Flooring Membrane – Primarily for isolating moisture sensitive flooring from dampness in the floor slab, but can also be used as the floor membrane as part of the Newton CDM System, when the survey has ascertained that there is no risk of water entering through the body of the slab.
- Advanced Moisture Isolation: Effectively isolates moisture-sensitive flooring from dampness in floor slabs, ensuring long-term protection.
- Early Installation Capability: Can be installed above uncured slabs and as soon as concrete is walkable, speeding up construction timelines.
- Exceptional Strength: Offers outstanding load-bearing capacity, capable of withstanding over 1000kN/m², ensuring durability under heavy loads.
- Versatile Application: Functions as both a floor membrane in the Newton CDM System and a high-load DPC in structural block walls, providing versatile waterproofing solutions.
- Chemical and Biological Resistance: Inert and highly resistant to water, alkalies, hydrocarbons, saline solutions, organic acids, minerals, bacteria, fungi, and other organisms, ensuring resilience in diverse environmental conditions.
Newton HydroTank 301-EP Metal Construction Joint Waterbar
Coated metal waterbar system used for sealing kickerless construction joints within retained concrete structures. It features an adhesive, reactive polymer coating on one of its sides which creates a permanent watertight seal that works immediately.
Installation is quick and easy with the waterbar fitted in place to the reinforcement steel with special clips so that after the placement of the concrete, the waterbar is fully embedded within the two adjoining elements, completely blocking the passage of water through the joint.
Because HydroTank 301-EP Metal Waterbar is not fixed to one of the concrete elements as is the case with conventional waterbars, the forming of a kicker is not necessary. Where the walls are formed above a kicker joint, use 315 Polymer Waterbar.
Newton HydroTank 301-EP Metal Waterbar is certified to resist water pressure of up to 5 bar (50m) and is resistant to all types of naturally occurring ground water types.
Newton Waterproofing
Unit 17-19, Sovereign Way, Tonbridge, Kent, TN9 1RH, United Kingdom
Newton Waterproofing Systems, est 1848, is the UK's leading independent supplier of structural waterproofing systems, including cellar and basement waterproofing, tanking and pumping products, damp proofing, water control and drainage products.