Externally Applied Drainage Membrane Newton HydroBond 410 GeoDrain
A two-core drainage sheet consisting of a non-woven geotextile filter layer thermally welded to a water impermeable high-density polyethylene (HDPE) drainage membrane.
The product provides drainage and protection to the outside face of basement walls to sloping sites, preventing the build-up of water pressure and protecting the structure from aggressive water, chemicals and toxins, and provides mechanical protection only when used against the ‘Type A’ waterproofing where the site is not sloping and so where ground water removal is not viable or recommended.
Consult the manufacturer's literature for relevant installation information.
Features and benefits:
- Assists in moving water around and downhill of the structure to sloping sites to prevent water pressure from bearing against the structure.
- Resistant to all chemicals normally found in the ground and unaffected by soil, bacteria and fungi.
- Withstands stresses and movement acting as a slip membrane as the backfill settles.
- Allows for backfilling with excavated earth.
- Extremely strong material, minimising the risk of damage when backfilling even when no protection board is used.
- Very high compressive strength.
- Suspended soil particles (fines) are filtered out by the geotextile layer.
- Quick and easy to install with a range of ancillary fixing and installation products.
- CE marked, and manufactured in accordance with EN 13252: 2016.
Other Products and Services from Newton Waterproofing
Newton HydroTank 315 Waterbar for Sealing Structures Against Water Leaks
A high grade, hydrophilic waterbar with high elasticity and high tensile strength, made from a polymer which swells when in contact with moisture, ideal for sealing structures against water leaks to both cast-in-place concrete and precast construction joints.
The swelling is achieved through hydrophilic acrylate polymers, which are inseparably embedded within the butylene carrier material. This results in high elasticity and exceptional tensile strength, even when fully expanded within the joint.
Due to its high resistance to acids, alkalis and organic solutions, HydroTank 315 Waterbar can be used to seal joints where aggressive water is expected such as within sewage treatment plants, biogas plants and liquid waste holding tanks.
HydroTank 315 Waterbar swells up to 9 times its original size when in contact with water, sealing the joint fully and reliably. The product is particularly suited to sealing non-compressed joints such as at the junction between slab and wall.
Newton Newtonite 801 Sealing Mastic for Sealing Penetration & Preventing Bridging
A multipurpose silicone sealant primarily used with the NewLath 805 Mesh Membrane and Newtonite 803 Membranes - applied to the plug before fixing into the membrane, 801 Mastic seals the penetration and prevents bridging between the damp substrate and new internal surface.
Applied to the fixing plugs before they are fitted, Newtonite 801 Mastic serves so as to seal the penetration and stop the occurrence of a 'bridge' between the damp or stained substrate and the new internal surface. Newtonite 801 Mastic has a high resistance to both ageing and extremes of temperature, as well as achieving a high adhesive strength, without primer, on the majority of materials used in the building and engineering industries.
Newton CDM BaseDrain & FloorDrain - Drainage System
Newton CDM BaseDrain and CDM FloorDrain is the drainage system used most commonly within the Newton CDM System − A range of products that collectively receive water ingressing at weaknesses within the structure and then discharge the collected water to a Newton Basement Pumping System or safe drainage.
The 18 mm holes drilled in both sides of the profile, as well as to the top surface, allows water from beneath the CDM Fibran XPS-500C insulation boards and within the spacer zone to enter the drainage channels more easily.
Newton Waterproofing
Unit 17-19, Sovereign Way, Tonbridge, Kent, TN9 1RH, United Kingdom
Newton Waterproofing Systems, est 1848, is the UK's leading independent supplier of structural waterproofing systems, including cellar and basement waterproofing, tanking and pumping products, damp proofing, water control and drainage products.