Company details for:
JSE Contract Services Ltd
(0)
68 Langley Avenue,
Arnold,
Nottingham,
NG5 6NN,
United Kingdom
Quick Links:
Products
DDA Compliance
The Disability Discrimination Act (DDA) places a responsibility on building owners and landlords etc. to provide safe, easy access to their premises for anyone, regardless of age, physical impairment or ability.
We provide DDA compliance services to many organisations; local authorities and building custodians alike, to ensure that access in to their premises comply with these regulations.
We can help with any improvement or alterations that may be required to your premises to help comply with the current DDA and building regulations, including:
Portable or Permanent Slip Resistant Ramps
Anti Slip Coatings to Existing Surfaces
Colour Contrasting, Slip Resistant Step Edges
Tactile Hazard Warning Surfaces
Small Building Works
If you need help with DDA regulation compliance then please call 01159267880
We pride ourselves on no-nonsense, sensible advice and best of all its free.
Anti-Slip Ramps
Ramps are one of the most popular enhancements to buildings to aid the access for disabled people and in particular − wheel chair users.
The disability discrimination act 1995 (D.D.A) places a responsibility on building owners to provide access to all people regardless of their physical ability or age.
Ramps can be constructed from materials that when worn can become extremely slippery in wet weather.
JSE Contract Services provide a wide range of systems to solve slip accidents on any surface used to construct a ramp.
These include liquid applied, fast drying resin systems and flexible, sheet GRP systems that can be easily installed with no disruption.
The disability discrimination act 1995 (D.D.A) places a responsibility on building owners to provide access to all people regardless of their physical ability or age.
Ramps can be constructed from materials that when worn can become extremely slippery in wet weather.
JSE Contract Services provide a wide range of systems to solve slip accidents on any surface used to construct a ramp.
These include liquid applied, fast drying resin systems and flexible, sheet GRP systems that can be easily installed with no disruption.
Corduroy − Blister Sufacing
Our corduroy and blister tactile surfaces provide the specified degree of alert required in the building regulations document M and also the current DDA regulations.
We can provide several different ranges of the tactiles in polyurethane, GRP, Brass and Stainless Steel materials.
Any environment can be catered for and slip resistance values, adapted to suit the individual requirements of the environment and amount of footfall.
Our speciality is the installation of individual polyurethane corduroy and blister tactiles which can be installed on to any surface without the need for costly and potentially damaging excavation of the surface.
We can provide several different ranges of the tactiles in polyurethane, GRP, Brass and Stainless Steel materials.
Any environment can be catered for and slip resistance values, adapted to suit the individual requirements of the environment and amount of footfall.
Our speciality is the installation of individual polyurethane corduroy and blister tactiles which can be installed on to any surface without the need for costly and potentially damaging excavation of the surface.
Hazard Surfacing
JSE Contract Services Ltd install tactile and hazard warning surfaces on steps and ramps etc to help the visually impaired be aware of specific hazards before they get to them.
We install flexible and rigid tactile panels that are fully DDA compliant and can be installed on virtually any surface without the need for costly excavation.
Our ultra fast drying,hard wearing resins are used to highlight step edges quickly without the need to close entrances for long periods of time.
We are also approved contractors for many different anti slip systems, including the K Grip system which is used to highlight step edges and install customers names and logos etc in to floors, which is widely used in retail and commercial environments.
The materials we use for our tactiles include Stainless Steel, Brass, Polyurethane and GRP etc which are among the hardest materials used in our industry, which make all our installations durable and extremely long lasting.
We install flexible and rigid tactile panels that are fully DDA compliant and can be installed on virtually any surface without the need for costly excavation.
Our ultra fast drying,hard wearing resins are used to highlight step edges quickly without the need to close entrances for long periods of time.
We are also approved contractors for many different anti slip systems, including the K Grip system which is used to highlight step edges and install customers names and logos etc in to floors, which is widely used in retail and commercial environments.
The materials we use for our tactiles include Stainless Steel, Brass, Polyurethane and GRP etc which are among the hardest materials used in our industry, which make all our installations durable and extremely long lasting.
Non-Slip Treads/Steps
All stairs and steps should have a slip resistant surface in wet conditions if you are to be fully D.D.A and building regulation compliant.
JSE Contract Services provide a comprehensive range of seamless slip resistant surfacing solutions in virtually any colour.
These systems offer excellent slip resistance in any weather and due to their ultra fast drying properties, there is very little downtime during installation.
Stainless steel, aluminium and G.R.P treads that are fully compliant can also be supplied and installed on to any surface, which offers years of maintenance free service.
All our systems are fully compliant with current D.D.A and building regulations.
JSE Contract Services provide a comprehensive range of seamless slip resistant surfacing solutions in virtually any colour.
These systems offer excellent slip resistance in any weather and due to their ultra fast drying properties, there is very little downtime during installation.
Stainless steel, aluminium and G.R.P treads that are fully compliant can also be supplied and installed on to any surface, which offers years of maintenance free service.
All our systems are fully compliant with current D.D.A and building regulations.
Semi Permanent/Portable Ramps
JSE Contract Services offer a comprehensive range of access ramps to help building owners comply with the disability discrimination act 1995.
Whether ramped access is required on the move or temporarily fixed, JSE have a complete range, from lightweight GRP ramps to aerospace quality aluminium ramps from fold up ramps with carrying handles to roll out / roll up ramps, our portable systems are ideal for any environment;
Modular ramp systems − permanent or re-useable
Roll-a-ramp portable systems
Depac ramp −portable/lightweight
Threshold ramps − multiayer modular systems
Handy ramps- standard/high edge & folding
Whether ramped access is required on the move or temporarily fixed, JSE have a complete range, from lightweight GRP ramps to aerospace quality aluminium ramps from fold up ramps with carrying handles to roll out / roll up ramps, our portable systems are ideal for any environment;
Modular ramp systems − permanent or re-useable
Roll-a-ramp portable systems
Depac ramp −portable/lightweight
Threshold ramps − multiayer modular systems
Handy ramps- standard/high edge & folding
Step Highlighting
DDA and building regulations require that access steps into buildings should have contrasting, slip resistant step nosing’s to aid access for the visually impaired.
JSE Contract Services provide ultra fast drying, slip resistant step highlight systems that can be installed to any material without damage to the surface.
We can also supply and install stainless steel, aluminium and GRP step nosing systems that last for years with little or no maintenance required after installation.
Another interesting product we install for a visually contrasting step edge is stainless steel or brass indicator studs which are fixed into the step and are virtually indestructible.
JSE Contract Services provide ultra fast drying, slip resistant step highlight systems that can be installed to any material without damage to the surface.
We can also supply and install stainless steel, aluminium and GRP step nosing systems that last for years with little or no maintenance required after installation.
Another interesting product we install for a visually contrasting step edge is stainless steel or brass indicator studs which are fixed into the step and are virtually indestructible.
Tactile/Hazard Warning Surfacing
DDA (Disability Discrimination Act 1995) compliance is a legal requirement when considering the ease of access into buildings.
Tactile hazard warning surfaces are installed to help the visually impaired be aware of a specific hazard before they get to it.
JSE Contract Services install unique tactile surfaces that do not require any excavation or the surface that are fully DDA and building regulation “DOC M “ compliant and can be installed on any surface.
We also offer a range of rigid and flexible tactile panels that are extremely hard wearing, slip resistant and fully compliant and can also be installed on to any level surface with little or no preparation work required.
Our range include corduroy and blister tactiles to meet the requirements of any industry and we also supply and install stud indicators which can be used as skate board deterrents on any surface and come in stainless steel, brass or polyurethane with a slip resistant finish.
Tactile hazard warning surfaces are installed to help the visually impaired be aware of a specific hazard before they get to it.
JSE Contract Services install unique tactile surfaces that do not require any excavation or the surface that are fully DDA and building regulation “DOC M “ compliant and can be installed on any surface.
We also offer a range of rigid and flexible tactile panels that are extremely hard wearing, slip resistant and fully compliant and can also be installed on to any level surface with little or no preparation work required.
Our range include corduroy and blister tactiles to meet the requirements of any industry and we also supply and install stud indicators which can be used as skate board deterrents on any surface and come in stainless steel, brass or polyurethane with a slip resistant finish.
Surface
JSE Contract Services provide a range of services for any surface, which include deep cleaning to any surface, the preparation of flooring by means of dust free shot blasting, high pressure water jetting, scarifying / floor planning and diamond grinding etc.
As part of our installation service, all surfaces are thoroughly deep cleaned and then, if required, we can abrade, scarify, grind or level a surface before applying our specialist coating systems.
Good surface preparation is critical to ensure a long life expectancy on any surface and it has been our experience that nearly all systems that fail are because of poor or no initial surface preparation.
As part of our installation service, all surfaces are thoroughly deep cleaned and then, if required, we can abrade, scarify, grind or level a surface before applying our specialist coating systems.
Good surface preparation is critical to ensure a long life expectancy on any surface and it has been our experience that nearly all systems that fail are because of poor or no initial surface preparation.
Concrete − Stone/Terrazo
These surfaces are some of the most widely used materials for pedestrian and vehicular access requirements and are generally used in high traffic areas.
Concrete and stone can become worn over time through wear and contamination and become slippery when wet.
Terrazzo is a decorative man made material that is mainly used in entrance ways and shopping centres etc, as it is extremely hard wearing, but due to the way it is finished and maintained, it has a very glossy finish that when wet becomes dangerously slippery.
Concrete and stone can become worn over time through wear and contamination and become slippery when wet.
Terrazzo is a decorative man made material that is mainly used in entrance ways and shopping centres etc, as it is extremely hard wearing, but due to the way it is finished and maintained, it has a very glossy finish that when wet becomes dangerously slippery.
Decking − Timber/Composite
Wooden and composite decking has become widely used throughout many industries and especially for domestic use, as it is a cost effective way to extend a property.
Unfortunately most types of decking can become very slippery when wet and if the surface becomes weathered or worn and not correctly maintained then it can become extremely dangerous.
JSE Contract Services provide a wide range of tried, tested and proven non − slip safety surfacing solutions for wooden and composite decking.
We can install clear coatings to maintain or enhance the beauty of the decking or coloured systems to hide weathered or worn surfaces.
Unfortunately most types of decking can become very slippery when wet and if the surface becomes weathered or worn and not correctly maintained then it can become extremely dangerous.
JSE Contract Services provide a wide range of tried, tested and proven non − slip safety surfacing solutions for wooden and composite decking.
We can install clear coatings to maintain or enhance the beauty of the decking or coloured systems to hide weathered or worn surfaces.
Marble and Granite
Marble and granite are materials that are commonly used in prestigious and corporate environments, these materials offer high levels of durability and long life expectancy but due to their highly decorative finish offer very little slip resistant in wet conditions becoming extremely dangerous.
JSE Contract Services can provide non slip systems that maintain the appearance of these materials while providing increased slip resistant properties.
We can also install coloured or contrasting stripes to stop edges and ramps to help with building regulations and D.D.A compliance without detracting from the overall appearance of the surface.
JSE Contract Services can provide non slip systems that maintain the appearance of these materials while providing increased slip resistant properties.
We can also install coloured or contrasting stripes to stop edges and ramps to help with building regulations and D.D.A compliance without detracting from the overall appearance of the surface.
Metal − Chequer Plate/Aluminium
Metal has been used in the construction of vehicular and pedestrian access installations for many years primarily because it is long lasting and robust but these surfaces can become every slippery in heavy traffic conditions causing the surface to become polished which presents a serious safety hazard when the surface is wet.
JSE Contract Services provide anti slip solutions for every type of metal from chequer plate, cast iron and stainless steel to flexible aluminium.
The systems we install are abrasion, corrosion and impact resistant and can be used in pedestrian and vehicular environments.
JSE Contract Services provide anti slip solutions for every type of metal from chequer plate, cast iron and stainless steel to flexible aluminium.
The systems we install are abrasion, corrosion and impact resistant and can be used in pedestrian and vehicular environments.
Tarmac and Asphalt
These substrates are extremely flexible in all weathers and due to their chemical / solvent contents, finding anti slip solutions can be difficult particularly in high traffic areas.
JSE contract services provide a comprehensive range of slip / skid resistant solutions that are extremely flexible and hard wearing in any environment.
These systems are available in any colour and slip / skid resistance can be adapted to suit the amount or type of traffic encountered.
We can also apply reflective materials on to our coating systems for use in car parks, roads etc and logo’s, numbers or symbols can be installed for D.D.A compliance works.
JSE contract services provide a comprehensive range of slip / skid resistant solutions that are extremely flexible and hard wearing in any environment.
These systems are available in any colour and slip / skid resistance can be adapted to suit the amount or type of traffic encountered.
We can also apply reflective materials on to our coating systems for use in car parks, roads etc and logo’s, numbers or symbols can be installed for D.D.A compliance works.
Tiles − Ceramic/Porcelain/Quarry
Tiles are one of the most popular, long lasting ways of enhancing the appearance of any floor in virtually any environment.
Unfortunately most tiles when worn, wet or contaminated offer very little slip resistance and in swimming pools or shower areas etc. this can pose a serious safety issue.
JSE Contract Services have tried and tested many products over the years and try to find products that do not change the appearance of the surface, do not damage or make the surface harder to clean or maintain but do increase the slip resistance of the surface in wet or contaminated conditions.
Unfortunately most tiles when worn, wet or contaminated offer very little slip resistance and in swimming pools or shower areas etc. this can pose a serious safety issue.
JSE Contract Services have tried and tested many products over the years and try to find products that do not change the appearance of the surface, do not damage or make the surface harder to clean or maintain but do increase the slip resistance of the surface in wet or contaminated conditions.
Vinyl/Amtico Altro
Vinyl floor coverings are used in virtually every building you my encounter and provide a wide range of decorating long lasting finishes.
Most vinyl’s provide excellent slip resistance in wet conditions, but many do not and are dangerously slippery when wet or greasy.
Even the vinyl’s that started off being slip resistant, can become worn and eventually will become slippery if not properly maintained.
Most vinyl’s provide excellent slip resistance in wet conditions, but many do not and are dangerously slippery when wet or greasy.
Even the vinyl’s that started off being slip resistant, can become worn and eventually will become slippery if not properly maintained.
Wood − Laminate/Hardwood/Oak
Wood has been used as a floor covering for hundreds of years as it is versatile, decorative and easy to maintain.
Unfortunately when the surface becomes worn or it has been sealed to protect the surface to make it easy to clean then when it get wet it has very low slip resistance and in some cases can be extremely dangerous.
JSE Contract Services provide and install a comprehensive range of liquid applied non-slip systems that can be clear or coloured with diamond hard particles added to maximise slip resistance.
Unfortunately when the surface becomes worn or it has been sealed to protect the surface to make it easy to clean then when it get wet it has very low slip resistance and in some cases can be extremely dangerous.
JSE Contract Services provide and install a comprehensive range of liquid applied non-slip systems that can be clear or coloured with diamond hard particles added to maximise slip resistance.
Wall Coatings
JSE Contract Services have over 30 years experience in the specialist coatings field and our knowledge of coating systems along with our work with key manufacturers and solution providers lead us to carry out numerous contracts for our customers providing hygienic and graffiti resistant coating systems to walls and ceilings etc. on their premises.
Hygienic
The hygienic systems we install are supplied by some of the worlds largest manufacturers and these systems have been rigorously tested.
One of the systems we regularly use is FDA and USDA approved for food contact and we have installed 1000’s of square metres of this product in a well-known, global pharmaceutical company, in their manufacturing and production areas.
These systems also benefit from being class 0 and class 1 fire rated as they are water borne resin systems.
One of the systems we regularly use is FDA and USDA approved for food contact and we have installed 1000’s of square metres of this product in a well-known, global pharmaceutical company, in their manufacturing and production areas.
These systems also benefit from being class 0 and class 1 fire rated as they are water borne resin systems.
Anti Graffiti
Graffiti attack on any surface can be costly to remove and distressing if offensive words are used.
We provide a one-stop service to many of our customers who require the graffiti removing in the first instance and then a prevention solution.
Although we can’t stop graffiti attacks, we can make it far easier for the building owner to remove by applying graffiti resistant coatings that render the surface impervious to the paint / markers used by the vandals.
We provide a one-stop service to many of our customers who require the graffiti removing in the first instance and then a prevention solution.
Although we can’t stop graffiti attacks, we can make it far easier for the building owner to remove by applying graffiti resistant coatings that render the surface impervious to the paint / markers used by the vandals.
About us
JSE Contract Services founded in 2006, specialise in a wide range of floor safety solutions designed to minimise the risk of slip accidents for any surface across a wide range of industries including Commercial, Industrial, Leisure, Health, Retail, Local Authorities, Rail, Airports and many more.
We work with manufacturers and key providers in order to trial and test new products and technologies for every surface.
JSE have more than 30 years’ experience in specialist coatings and surface preparation. We operate across the UK, delivering a professional installation service to all of our customers. Our aim is to improve the safety of our customers by minimising the risk of slip accidents in their working environment while complying with current building, DDA and safety regulations.
JSE Contract Services speciality is ultra-fast drying coating systems which can be used to almost any surface, in any environment. They are ready to be back in use almost instantly in sub-zero temperatures as low as -30 degrees and prove popular amongst many of our regular customers.
Other solutions include:
• Surface − Concrete, Decking, Marble & Granite, Metal, Tarmac & Asphalt, Tiles, Vinyl, Wood
• DDA − Anti-Slip Ramps, Corduroy, Hazard Surfacing, Non-Slip Treads, Portable Ramps, Step Highlighting, Tactile Surfacing
Specialist Services
Wall Coatings − Hygienic and Anti-Graffiti
We offer impartial and free advice as well as an on-site consultancy service.
We work with manufacturers and key providers in order to trial and test new products and technologies for every surface.
JSE have more than 30 years’ experience in specialist coatings and surface preparation. We operate across the UK, delivering a professional installation service to all of our customers. Our aim is to improve the safety of our customers by minimising the risk of slip accidents in their working environment while complying with current building, DDA and safety regulations.
JSE Contract Services speciality is ultra-fast drying coating systems which can be used to almost any surface, in any environment. They are ready to be back in use almost instantly in sub-zero temperatures as low as -30 degrees and prove popular amongst many of our regular customers.
Other solutions include:
• Surface − Concrete, Decking, Marble & Granite, Metal, Tarmac & Asphalt, Tiles, Vinyl, Wood
• DDA − Anti-Slip Ramps, Corduroy, Hazard Surfacing, Non-Slip Treads, Portable Ramps, Step Highlighting, Tactile Surfacing
Specialist Services
Wall Coatings − Hygienic and Anti-Graffiti
We offer impartial and free advice as well as an on-site consultancy service.
Sponsored Links
Trade Associations
